Kernel Panic while installing Marvericks on HP Elite 8300 CMT

[saadhiqiin]

HP Compaq Elite 8300 CMT STD Chassis
Intel Q77 Chipset
Intel Core 15 3470 3.2 GHz 6M
Graphics Intel HD 2500
500 GB7200 RPM Baracuda HDD
16 GB DDR3 1600 RAM
Intel 82579LM Gigabit

 

[RehabMan]

HP Compaq Elite 8300 CMT STD Chassis
Intel Q77 Chipset
Intel Core 15 3470 3.2 GHz 6M
Graphics Intel HD 2500
500 GB7200 RPM Baracuda HDD
16 GB DDR3 1600 RAM
Intel 82579LM Gigabit

No one can help without information about the actual KP and what you're doing to cause it. Post a photo and fully describe at what point in the guide you are at.

Use this guide as a reference for describing where you are: http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html

Note: Intel HD2500 is not fully supported, so you'll probably need a graphics card.

 

[ajay1685]

No one can help without information about the actual KP and what you're doing to cause it. Post a photo and fully describe at what point in the guide you are at.

Use this guide as a reference for describing where you are: http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html

Note: Intel HD2500 is not fully supported, so you'll probably need a graphics card.

Hi RehabMan , I trying to install El Capitan on this same system with 750Ti , with standard guide using Unibeast.
When I booted it shows " Unable to load Kernal Catch " I also tried from option boot without kernel catch. still same message