- Joined
- Jul 13, 2015
- Messages
- 4
- Motherboard
- GA Z68X-UD3-B3
- CPU
- i5K Sandy Bridge
- Graphics
- Sapphire RX 480 Nitro
- Mac
- Mobile Phone
Hello guys,
I use multi boot pc, by selecting the right first HDD to start. Win/Linux and Mac Os Yosemite (sys defined as MacBook Air).
I did update from Yosemite to Sierra with clover - updated clover 3820(?), ran Update, everything went fine.
When it has finished, I realized, there is no sound (ALC889) so I decided to use MultiBeast 901 (included clover 3766) to make update.
I Have no idea, what everything I did seted up, its few days of trying different combinations already.
After restart, I have got just black screen. So I expected, there is some problem with boatloader conf.
I have made USB boatloder version Clover 3820, even another confs from MultiBeast with 3766.
Seted up Legacy bios / Uefi, different sys definitions up to 14,2, darkwake=0/1, -v,-x, without cach, injected kexts, any possible combination...
I have got Kernel panic cpu where I did not find any indicia what I could be wrong,
or
Screen with logo and text under like that: system was failured, will be restarted in 10 seconds...
By loading from USB I am able to run Recovery setup, reinstall Sierra, but nothing chaneged.
FakeSMC is there v6.21..
When I copied my original old version of FakeSMC to Kext folders, -v says that the is ignored coz has already newer verion loaded.
Kext folder on USB contains (dont know versions, but for sure older then one year):
FakeSMC
NullCPUPowerManagment
RealtekRTL81XX
Drivers UEFI64
CSMVideoDxe
FSInject
OsxAptioFix2Drv
OsxAptioFix
OsxFatBinaryDrv
PartitionDxe
VboxHfs
My HW conf is
Gigabyte Z68X-UD3-B3 (U1f) (overclocked or not, defaults loaded or not, profiles working with yosemite dont work anymore)
i5 2500K, Sandy bridge
Sapphire RX 480 8G Nitro
I use multi boot pc, by selecting the right first HDD to start. Win/Linux and Mac Os Yosemite (sys defined as MacBook Air).
I did update from Yosemite to Sierra with clover - updated clover 3820(?), ran Update, everything went fine.
When it has finished, I realized, there is no sound (ALC889) so I decided to use MultiBeast 901 (included clover 3766) to make update.
I Have no idea, what everything I did seted up, its few days of trying different combinations already.
After restart, I have got just black screen. So I expected, there is some problem with boatloader conf.
I have made USB boatloder version Clover 3820, even another confs from MultiBeast with 3766.
Seted up Legacy bios / Uefi, different sys definitions up to 14,2, darkwake=0/1, -v,-x, without cach, injected kexts, any possible combination...
I have got Kernel panic cpu where I did not find any indicia what I could be wrong,
or
Screen with logo and text under like that: system was failured, will be restarted in 10 seconds...
By loading from USB I am able to run Recovery setup, reinstall Sierra, but nothing chaneged.
FakeSMC is there v6.21..
When I copied my original old version of FakeSMC to Kext folders, -v says that the is ignored coz has already newer verion loaded.
Kext folder on USB contains (dont know versions, but for sure older then one year):
FakeSMC
NullCPUPowerManagment
RealtekRTL81XX
Drivers UEFI64
CSMVideoDxe
FSInject
OsxAptioFix2Drv
OsxAptioFix
OsxFatBinaryDrv
PartitionDxe
VboxHfs
My HW conf is
Gigabyte Z68X-UD3-B3 (U1f) (overclocked or not, defaults loaded or not, profiles working with yosemite dont work anymore)
i5 2500K, Sandy bridge
Sapphire RX 480 8G Nitro