is it possible to install macOS Mojave on HP ProDesk 400 G5 Microtower Business PC?

[attend]

Detail:
Intel Core i7-8700 processor
DDR4-2666 - 8 GB total system memory (8 GB x 1)
Intel UHD Graphics 630
BIOS HP BIOSphere Gen4

I've made usb boot disk followed:
https://www.tonymacx86.com/threads/...ojave-on-any-supported-intel-based-pc.259381/

My problem is the usb stick can boot from my Lenovo T430 laptop but cannot boot from the HP desktop. it stuck at "Ethernet [RealtekRTL8111]: RLT8168H/8111H: (Chipset 29) at 0x<ptr>,.... when I use -v when booting.

Is there any solution?

Many thanks.

 

[trs96]

You could add the Realtek Ethernet kext to your Unibeast drive and see if that helps. Mount the EFI partition on the USB and then put the kext into /Clover/kexts/other folder if it's not already there.

https://www.tonymacx86.com/resources/realtekrtl8111.327/

 

[attend]

Thanks! it's a good clue.
I've added usb kext to the folder and it works!

 

[nirvanajuice]

Ciao Mate
I think I have the same computer,
I followed it step by step, but in the loader phase it crashes.
I also replaced the Realtek kexts file

Post and attach config and screeshot,
what do you think, can you help me?

My Hardware
Computer: HP HP ProDesk 400 G4 MT
CPU: Intel Core i7-7700 (Kaby Lake-S, B0)
3600 MHz (36.00x100.0) @ 3192 MHz (32.00x99.8)
Motherboard: HP 82A1
Chipset: Intel H270 (Kaby Lake)
Memory: 16280 MBytes @ 1197 MHz, 17-17-17-39
Graphics: Intel HD Graphics 630 (Kaby Lake-S GT2) - Integrated Graphics Controller [Hewlett-Packard]
Intel HD Graphics 630, 1024 MB
Drive: TOSHIBA DT01ACA100, 976.8 GB, Serial ATA 6Gb/s @ 6Gb/s
Sound: Intel Kaby Lake - High Definition Audio / cAVS (Audio, Voice, Speech) [A0]
Network: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC