Contribute
Register

Intel HD 630, i7-7700K (10.13.4) - Screen Glitching

Status
Not open for further replies.
zaa.forum

zaa.forum

Joined
Oct 20, 2015
Messages
72
Motherboard
GIGABYTE 15 OLED KC (4K)
CPU
i7-10870H
Graphics
UHD 630
Mac
  1. iMac
  2. MacBook
  3. MacBook Air
  4. Mac mini
Mobile Phone
  1. Android
  2. iOS
Hi,
I installed a clean 10.13.4. The graphics card is detected correctly, but it does not work correctly. Terrible glitches.

My Kext: FakeSMC.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, AppleALC.kext, XHCI-200-series-injector.kext
Bios: DVMT Pre-Allocated=96 DVMT Total Gfx Mem=128
CLOVER:
-disablegfxfirmware kernel flag
change GFX0 to IGPU

I changed:
1) ig-platform-id: 0x59120000 - not help.
2) Inject Intel - not help.
3) Fake ID - IntelGFX - 0x59128086 - not help.
4) DVMT Pre-Allocated=1024 and add kext IntelGraphicsDVMTFixup - not help
5) DVMT Pre-Allocated=128 - not help
6) Change SMBIOS iMac18.3 to 18.2 or 18.1 or 17.1, but this does not help.

P.S. sorry for my English
 

Attachments

  • debug_13243.zip
    2.4 MB · Views: 69
zaa.forum said:
Hi,
I installed a clean 10.13.4. The graphics card is detected correctly, but it does not work correctly. Terrible glitches.

My Kext: FakeSMC.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, AppleALC.kext, XHCI-200-series-injector.kext
Bios: DVMT Pre-Allocated=96 DVMT Total Gfx Mem=128
CLOVER:
-disablegfxfirmware kernel flag
change GFX0 to IGPU

I changed:
1) ig-platform-id: 0x59120000 - not help.
2) Inject Intel - not help.
3) Fake ID - IntelGFX - 0x59128086 - not help.
4) DVMT Pre-Allocated=1024 and add kext IntelGraphicsDVMTFixup - not help
5) DVMT Pre-Allocated=128 - not help
6) Change SMBIOS iMac18.3 to 18.2 or 18.1 or 17.1, but this does not help.

P.S. sorry for my English
Click to expand...

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 

Attachments

  • debug_13243.zip
    2.4 MB · Views: 62
RehabMan said:
Your ioreg shows graphics (QE/CI) working.
But:
- iMac18,3 is not a good choice. Use iMac17,1 or iMac14,1 instead.
- IntelGraphicsFixup.kext is missing
- kexts not installed correctly'

All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
Click to expand...

Thank you for your help. I will sort this out :(
I thought I was a genius and correctly added all KEXT :)
 
Hello zaa.forum
I do have an HD 630 in a Dell Optiplex 3050 desktop with all the setting and kexts required or suggested here.
Mine sports 1536 MB and QE/CI are working.

No way: the sooner rebooting after the upgrade to 10.13.4 I get flashing and dancing screen, non refresh, no way to use the hack. Screen is shacking and moving on the display...
10.3.3 works OK with the very same config.
Luckily I do have a dual SSD config so I can boot from 10.13.3.

Tried any sort of update of kexts, tried with different configs.
Tried fresh 10,13,4 installation and update from 10.13.3: until now no way.
Sorry cannot help but if I will be able to solve the thing let you know.
 
karterilla said:
Hello zaa.forum
I do have an HD 630 in a Dell Optiplex 3050 desktop with all the setting and kexts required or suggested here.
Mine sports 1536 MB and QE/CI are working.

No way: the sooner rebooting after the upgrade to 10.13.4 I get flashing and dancing screen, non refresh, no way to use the hack. Screen is shacking and moving on the display...
10.3.3 works OK with the very same config.
Luckily I do have a dual SSD config so I can boot from 10.13.3.

Tried any sort of update of kexts, tried with different configs.
Tried fresh 10,13,4 installation and update from 10.13.3: until now no way.
Sorry cannot help but if I will be able to solve the thing let you know.
Click to expand...
Use iMac17,1
 
zaa.forum said:
Use iMac17,1
Click to expand...
Thanks.
No way already tried any possibile SMBIOS config.
For me it is not that one the problem.

Again in 10.13.3 using different type of Mac still working with no problem.

The sooner I upgrade to .4 make the thing going crazy.
Last thing I need to test is upgrading from Clover 44.20 to the latest to check if something is changing.
I do have tried with 2 different Optiplex installed at a different time with slightly different configs (BIOS ver, audio), but same result.

Keep trying.
 
karterilla said:
Hello zaa.forum
I do have an HD 630 in a Dell Optiplex 3050 desktop with all the setting and kexts required or suggested here.
Mine sports 1536 MB and QE/CI are working.

No way: the sooner rebooting after the upgrade to 10.13.4 I get flashing and dancing screen, non refresh, no way to use the hack. Screen is shacking and moving on the display...
10.3.3 works OK with the very same config.
Luckily I do have a dual SSD config so I can boot from 10.13.3.

Tried any sort of update of kexts, tried with different configs.
Tried fresh 10,13,4 installation and update from 10.13.3: until now no way.
Sorry cannot help but if I will be able to solve the thing let you know.
Click to expand...
Hello karterilla;

Would you pls share your EFI to me ? i have the same 3050 machine, and my audio not work , can start up when sleep. thx very much!

p.s.:HD630 can work use my config.plist,or iMac 18.1
 

Attachments

  • CLOVER.zip
    3.3 MB · Views: 148
kirabcec said:
Hello karterilla;

Would you pls share your EFI to me ? i have the same 3050 machine, and my audio not work , can start up when sleep. thx very much!

p.s.:HD630 can work use my config.plist,or iMac 18.1
Click to expand...
Sorry, did you find the solution for the hdmi audio in 10.13.4? I have the same problem as you. Thank you very much!
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top