- Joined
- Mar 4, 2011
- Messages
- 49
- Motherboard
- Gigabyte X58A-UD3R rev2.0
- CPU
- X5670
- Graphics
- RX 560
- Mac
- Mobile Phone
OK, I got this card and got it work on my X58A-UD3R Ver.2 by using this method.
I found this card was more stable and speed was higher than on board ethernet card.
At the same time, I can use "Back to my Mac" by using this card when system goes to sleep.
I can wakeup the system by using "Back to my Mac" function through internet.
The problem is I can not use power button to wake up my system.
It will reboot instead of wake up if I push the power button.
Anyone know how to fix this problem? Thanks!
(I can wake up the system by push power bottom before install this card).
****[Update] Maybe this is the reason **********
I found out this problem happened after I turn off the on board ethernet in BIOS.
After I turn it on in BIOS again seems fix the problem, I can wake up system by power button.
No matter use sleep function in menu bar or auto sleep by PleaseSleep.
I already test it many times and over night, it works perfect now.
Remember to set "Green Lan" to "Disable" in BIOS.
*** The symptom ***
Sleep the system, then wake the system by other computers and sleep again.
After these procedures, then push the power button will became reboot.
If I put the system sleep, then push power button will wake up the system.
So, the problem happened right after I use the function "Wake on Demand".
If I use "Wake on Lan" software to wake up the system, everything goes fine.
Don't know how to solve this problem~~~
By the way, this is the speed of my card. Peak speed: 102MB/s
I found this card was more stable and speed was higher than on board ethernet card.
At the same time, I can use "Back to my Mac" by using this card when system goes to sleep.
I can wakeup the system by using "Back to my Mac" function through internet.
The problem is I can not use power button to wake up my system.
It will reboot instead of wake up if I push the power button.
Anyone know how to fix this problem? Thanks!
(I can wake up the system by push power bottom before install this card).
****[Update] Maybe this is the reason **********
I found out this problem happened after I turn off the on board ethernet in BIOS.
After I turn it on in BIOS again seems fix the problem, I can wake up system by power button.
No matter use sleep function in menu bar or auto sleep by PleaseSleep.
I already test it many times and over night, it works perfect now.
Remember to set "Green Lan" to "Disable" in BIOS.
*** The symptom ***
Sleep the system, then wake the system by other computers and sleep again.
After these procedures, then push the power button will became reboot.
If I put the system sleep, then push power button will wake up the system.
So, the problem happened right after I use the function "Wake on Demand".
If I use "Wake on Lan" software to wake up the system, everything goes fine.
Don't know how to solve this problem~~~
By the way, this is the speed of my card. Peak speed: 102MB/s