- Joined
- Feb 17, 2012
- Messages
- 25
- Motherboard
- GA-Z68A-D3H-B3 - OC 0.66
- CPU
- i5-2500K
- Graphics
- Radeon Nitro RX 5500 XT
- Mac
- Mobile Phone
I have been using my Intel HD 3000 as the primary display adapter (DVI) with an NVidia GeForce GTX 650 TI (Dual DVI). Recently, I wanted to switch around to get better display resolution on the Clover boot manager screens and use the NVidia GeForce GTX 650 TI as the first, or primary adapter. I am running macOS Sierra 10.12.6 on a Gigabyte Z68 motherboard and Core i5 2500K.
When I switch my BIOS to set the PCI Graphics as first display and enable the on-board Intel HD 3000 IGFX my system boots fine etc., but when macOS starts, the display on the integrated Intel HD 3000 is all garbled.
Can anyone advise on where to start with resolving this ? I am thinking it might be a framebuffer issue. Or is this is known issue that cannot be resolved ?
Thanks!
When I switch my BIOS to set the PCI Graphics as first display and enable the on-board Intel HD 3000 IGFX my system boots fine etc., but when macOS starts, the display on the integrated Intel HD 3000 is all garbled.
Can anyone advise on where to start with resolving this ? I am thinking it might be a framebuffer issue. Or is this is known issue that cannot be resolved ?
Thanks!