Installation require Mac Wireless Mouse

[macjere]

Hello all, please I need some help, I am completly new to hackintosh.
I tried and successfully installed MacOS 10.12 on my laptop using clover and it workd fine though didnt have wireless access
when i tried installing 10.13 using clover too it tries installing but the but i am eventually greeted with a screen which seems to be instructing me to turn on my Apple wireless mouse. I cant seen to pass that point as in do not have and my keyboard and track pad are not working after a while my usb and screen goes out.

Please how do i get pass here.
NOTE i am a complete novice to hackingtosh

my computer:
HP Pavilion 15 Touch Screen
HDD: 1TB
RAM: 8GB
CPU: core i5 6200U
MOBO: HP 820B
GRAPHICS: Intel HD 520

 

[Feartech]

Hello all, please I need some help, I am completly new to hackintosh.
I tried and successfully installed MacOS 10.12 on my laptop using clover and it workd fine though didnt have wireless access
when i tried installing 10.13 using clover too it tries installing but the but i am eventually greeted with a screen which seems to be instructing me to turn on my Apple wireless mouse. I cant seen to pass that point as in do not have and my keyboard and track pad are not working after a while my usb and screen goes out.

Please how do i get pass here.
NOTE i am a complete novice to hackingtosh

my computer:
HP Pavilion 15 Touch Screen
HDD: 1TB
RAM: 8GB
CPU: core i5 6200U
MOBO: HP 820B
GRAPHICS: Intel HD 520

Read up on the FAQ first:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Link to laptop guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

If you get stuck and need some help then upload your "Problem Reporting" files.

List of files required can be found from the FAQ link above

you can press space bar to get rid of that message

 

[macjere]

Read up on the FAQ first:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Link to laptop guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

If you get stuck and need some help then upload your "Problem Reporting" files.

List of files required can be found from the FAQ link above

you can press space bar to get rid of that message

Thanks so much for your speedy response.
Like I mention I am a complete novice here. How do I get the problem reporting file?
Space did help skip the page as the entire keyboard is unresponsive at that point.

i had followed this post guide when installing it in the first place
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Well still same, problem not fixed
Tried attaching a video of the screen but not working

 

[RehabMan]

Thanks so much for your speedy response.
Like I mention I am a complete novice here. How do I get the problem reporting file?
Space did help skip the page as the entire keyboard is unresponsive at that point.

i had followed this post guide when installing it in the first place
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Well still same, problem not fixed
Tried attaching a video of the screen but not working

Not a guide. Moved to laptop support.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[macjere]

Thank all it has been fixed, the installation was not detecting my laptop keyboard and trackpad I had to plug and external key board and mouse when booting from USB and it worked fine
However, I have a problem,
I have HP pavilion
Intel core i5 6200U
Intel HD 520
I have installed high Sierra 10.13.1 it is working fine but
1. No audio, tried VooDooHDA.kext but not fixed
2. No battery bar, tried ACPIBatteryManager.kext but not fixed
3. No wifi and Bluetooth (my system has an Inter dual)
4. No ethernet, tried RealtekRTL8111.kext but not fixed
any fix?

 

[RehabMan]

Thank all it has been fixed, the installation was not detecting my laptop keyboard and trackpad I had to plug and external key board and mouse when booting from USB and it worked fine
However, I have a problem,
I have HP pavilion
Intel core i5 6200U
Intel HD 520
I have installed high Sierra 10.13.1 it is working fine but
1. No audio, tried VooDooHDA.kext but not fixed
2. No battery bar, tried ACPIBatteryManager.kext but not fixed
3. No wifi and Bluetooth (my system has an Inter dual)
4. No ethernet, tried RealtekRTL8111.kext but not fixed
any fix?

Audio: use Mirone's HDA patcher for patched AppleHDA. Do required ACPI patching as per FAQ.
Battery: need to patch ACPI as per FAQ.
WiFi/BT: need compatible hardware. Read the FAQ.
Ethernet: must install correct kext. Read the FAQ.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[macjere]

Hello please help.
wifi... not working
sound... work and stops after reboot and then works again after some reboots
blackscreen on wake...
no battery control
laptop goes off on battery only after a few minutes

 

[macjere]

Jarvis report Realtek unknown so I don't know how I can use Mirone Patcher to patch AppleHDA

Hardware info:
- Realtek (Unknown) (10ec:0295) Rev.(00100002)
- Controller 8086:9d70 (sub-ven:103c:820b)
- Driver: AppleHDA.kext

SSDT-4.aml succesfully extracted!
DSDT.aml succesfully extracted!
SSDT-1.aml succesfully extracted!
SSDT.aml succesfully extracted!
SSDT-3.aml succesfully extracted!
SSDT-6.aml succesfully extracted!
SSDT-5.aml succesfully extracted!
SSDT-2.aml succesfully extracted!
SSDT-7.aml succesfully extracted!
Found "Device (HDEF)" in DSDT.aml
No property "layout-id" was found inside your ACPI tables, maybe injected in other way, looking in ioreg..
Found supported "layout-id = 3" in ioreg: be sure that respect your audio connectors
No "Device (HDAU)" was found inside your ACPI tables. That is normal w/o a PCI Video card or w/o an HDMI connector on it!

AppleHDA Patcher.app only supports (if patched by Mirone):
layout-id 3 for laptop's,
layout-id 5 for Desktop's with 3 connectors (pink, green and blue),
layout-id 7 for Desktop's with 5/6 connectors (gray, black, orange, pink, green and blue),
layout-id 9 for Desktop's with 5/6 connectors (gray, black, orange, pink, green, blue, CodecAddress:2)

aDummyHDA.kext works only is /System/Library/Extensions.
Laptop's may be need the provided ACPI Patch such system_IRQ.txt to be functional.
HDAEnabler.kext maybe usefull if you don't want to edit your ACPI table or the Clover's config,
or the org.Chameleon.Boot.plist.
CodecCommander.kext is usefull in the case you have no sound after waking from sleep.

Generated kexts should be installed in a proper way, repairing its permissions and rebuilding the cache:
dragging kexts into Pandora's Box.app window will help you to do that!

 

[RehabMan]

Hello please help.
wifi... not working
sound... work and stops after reboot and then works again after some reboots
blackscreen on wake...
no battery control
laptop goes off on battery only after a few minutes

Work on one thing at a time.
See FAQ:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

For example, battery status guide is linked from the FAQ:
https://www.tonymacx86.com/threads/guide-how-to-patch-dsdt-for-working-battery-status.116102/

 

[RehabMan]

Jarvis report Realtek unknown so I don't know how I can use Mirone Patcher to patch AppleHDA

Hardware info:
- Realtek (Unknown) (10ec:0295) Rev.(00100002)
- Controller 8086:9d70 (sub-ven:103c:820b)
- Driver: AppleHDA.kext

SSDT-4.aml succesfully extracted!
DSDT.aml succesfully extracted!
SSDT-1.aml succesfully extracted!
SSDT.aml succesfully extracted!
SSDT-3.aml succesfully extracted!
SSDT-6.aml succesfully extracted!
SSDT-5.aml succesfully extracted!
SSDT-2.aml succesfully extracted!
SSDT-7.aml succesfully extracted!
Found "Device (HDEF)" in DSDT.aml
No property "layout-id" was found inside your ACPI tables, maybe injected in other way, looking in ioreg..
Found supported "layout-id = 3" in ioreg: be sure that respect your audio connectors
No "Device (HDAU)" was found inside your ACPI tables. That is normal w/o a PCI Video card or w/o an HDMI connector on it!

AppleHDA Patcher.app only supports (if patched by Mirone):
layout-id 3 for laptop's,
layout-id 5 for Desktop's with 3 connectors (pink, green and blue),
layout-id 7 for Desktop's with 5/6 connectors (gray, black, orange, pink, green and blue),
layout-id 9 for Desktop's with 5/6 connectors (gray, black, orange, pink, green, blue, CodecAddress:2)

aDummyHDA.kext works only is /System/Library/Extensions.
Laptop's may be need the provided ACPI Patch such system_IRQ.txt to be functional.
HDAEnabler.kext maybe usefull if you don't want to edit your ACPI table or the Clover's config,
or the org.Chameleon.Boot.plist.
CodecCommander.kext is usefull in the case you have no sound after waking from sleep.

Generated kexts should be installed in a proper way, repairing its permissions and rebuilding the cache:
dragging kexts into Pandora's Box.app window will help you to do that!

You need to obtain an audio codec dump from Linux.