- Joined
- Jan 6, 2015
- Messages
- 6
- CPU
- 3,49 GHz Intel Core i3
- Graphics
- NVIDIA GeForce GT 630 2GB
- Mac
- Mobile Phone
Hello
I'm trying to install Mac Yosemite!
however, always happens the same problem ...
I can make the boot from the flash drive ...
appears the gray screen with the Apple logo,
appears below the logo, a bar for Loading ...
after carrying around 20%, a black screen.
this black screen does not do anything else ...
is the screen and does nothing ...
I am beginner and on Flags, put some of the tutorial, however, did not help ...
also to mount the flash drive with the boot Yosemite, tried the options,
Only Laptop Support;
Only Legacy USB Support;
Selected both;
And None selected;
in all situations is the same ...
My hardware is the following:
Processor: QuadCore Intel Mobile Core i7-720QM, 2533 MHz (19 x 133)
Motherboard: Sony VPC-F113FX
Chipset Motherboard: Intel Ibex Peak-M PM55, Intel Clarksfield
Memory: 6128 MB (DDR3 SDRAM DDR3-1333)
Bios Type: AMI
Graphics adapter: NVIDIA GeForce 310M (512MB)
Hard drive: SanDisk SDSSDHP128G (128GB, SATA-III)
The Hard Drive will be switching to one with 500GB capacity ...
With this information I wonder what boot flag would have to use ...
and if it is possible to use the Yosemite
Thank you for attention, and I look anxious for a solution ...
I'm trying to install Mac Yosemite!
however, always happens the same problem ...
I can make the boot from the flash drive ...
appears the gray screen with the Apple logo,
appears below the logo, a bar for Loading ...
after carrying around 20%, a black screen.
this black screen does not do anything else ...
is the screen and does nothing ...
I am beginner and on Flags, put some of the tutorial, however, did not help ...
also to mount the flash drive with the boot Yosemite, tried the options,
Only Laptop Support;
Only Legacy USB Support;
Selected both;
And None selected;
in all situations is the same ...
My hardware is the following:
Processor: QuadCore Intel Mobile Core i7-720QM, 2533 MHz (19 x 133)
Motherboard: Sony VPC-F113FX
Chipset Motherboard: Intel Ibex Peak-M PM55, Intel Clarksfield
Memory: 6128 MB (DDR3 SDRAM DDR3-1333)
Bios Type: AMI
Graphics adapter: NVIDIA GeForce 310M (512MB)
Hard drive: SanDisk SDSSDHP128G (128GB, SATA-III)
The Hard Drive will be switching to one with 500GB capacity ...
With this information I wonder what boot flag would have to use ...
and if it is possible to use the Yosemite
Thank you for attention, and I look anxious for a solution ...