Install EI Capitan using USB to PC, hang...

[steveturtle]

Hi, bros,

My PC config:
Motherboard: MSI B150M-BAZOOKA
CPU: Intel I5-6500 3.2G
Display card: Gigabyte nvidia geforce GT 620
Ram: 16G DDR4-2133

Tools to create USB:
MultiBeast - El Capitan 8.2.2
UniBeast 6.2.0
Clover Configuator (Classic Edition) [>= 10.8]

After boot, I try the following boot args:
nv_disable=1 cpus=1 -v

hangs at:
com.apple.AppleFSCompressionTypeZlib load succeeded.

(screen cap is attached)

Can anyone help?

 

[linuxrox]

open config.plist on USB EFI partition using Clover Configurator and select Inject Nvidia under Graphics section

 

[steveturtle]

do you mean this?
<key>Graphics</key><dict><key>Inject</key><dict><key>ATI</key><false/><key>Intel</key><false/><key>NVidia</key><true/></dict></dict>

I also attached the config.plist

 

[linuxrox]

yes

 

[steveturtle]

So, it hangs at the point that I stated before.

 

[linuxrox]

have you tried to remove the Nvidia card and just use the onboard card ?

http://www.tonymacx86.com/threads/s...grated-graphics-working-as-of-10-11-4.188891/

 

[steveturtle]

No, not yet.
But I will try.
So, according to the debug message, do you think it is the display card (GT 620) not support problem ?

 

[linuxrox]

GT620 should be supported, injecting Nvidia flag should be sufficient. I wanted to remove it to reduce the number of variables. What output are you using , DVI or HDMI ?

 

[steveturtle]

OK. tried to remove the display card GT 620 and use onboard display card.
also modified the config.plist in the USB to boot.
tried the following boot args:
-v
-v nv_disable=1

also hang at the same point. (please see the attachment)

 

[linuxrox]

you might want to ping xelxel for help , looks like he was getting the same error and resolved the issue

http://www.tonymacx86.com/threads/g...k-i5-6600k-gtx-970.187255/page-3#post-1252697