i7-2720QM and OSX

[Inmike09]

Thanks @BigDonkey. Just to clarify so I don't screw up my installation since I am still on vacation:

1) Run 10.7.4 Update
2) Run KextBeast with the patched kexts you provided (not the AppleIntelCPUPowerManagement one from Multibeast 4.5.2)
3) Make sure DropSSDT=Yes is in my org.chameleon.boot.plist
4) Replace my current SSDT.aml with the one you provided
5) Reboot

Correct? I am also on the F.09 BIOS. I believe I should be okay with that.

 

[BigDonkey]

That sounds about right.
It seems that HDMI mirroring is broken in 10.7.4 so may want to keep 10.7.3 AppleIntelSNBGraphicsFB.kext version intact.

And as always, NullCPUPowerManagement is your friend in case something goes wrong.

 

[nicknitro]

Hi BigDonkey,

Im in the same Situation with KP on my Probook.
Allways gets KP on AppleIntelCPUPower,

Could you please make an SSDT compatible with my Probook 4530s BIOS F.20 P/N XU015UT?
I have a Core i7 2760qm 2.4Ghz TurboBoost to 3.5Ghz and 16Gb 1600Mhz Ram.

Thanks for your help.

Daniel

 

[xequtor]

just generated new SSDT with Mobile RevoGirl script and over 11000 in geekbench

 

[xequtor]

Hi BigDonkey,

Im in the same Situation with KP on my Probook.
Allways gets KP on AppleIntelCPUPower,

Could you please make an SSDT compatible with my Probook 4530s BIOS F.20 P/N XU015UT?
I have a Core i7 2760qm 2.4Ghz TurboBoost to 3.5Ghz and 16Gb 1600Mhz Ram.

Thanks for your help.

Daniel

try attached one, make sure you select Drop SSDT org.chameleon.Boot

 

[Inmike09]

Hey guys! I thought I would revive this thread since I noticed something funny the other day. While running the program Novabench I noticed that my GPU score was very low--3d Frames Per Second = 42. I remember that originally when I had my i3-2310m and i5-2430m that my 3D Frames Per Second was in the high 60's to low 70's. Could anyone out there do a quick test of this on their Probook running the i7-2720qm?