i7-10510u no 4k option

[mysticfact]

Hello there!

Just playing around with some laptop I bought, specifically:
Intel Core i7-10510u, Intel UHD Graphics for 10th Gen Intel Processors

Took some time to get the graphics acceleration, as well as HDMI to work fully, but they now both do. This CPU has the built in Intel UHD GPU, which should easily be able to drive 4K@60Hz in Windows 11. But, I can always only choose 2K resolution in display settings panel in Ventura.

 

[Feartech]

Hello there!

Just playing around with some laptop I bought, specifically:
Intel Core i7-10510u, Intel UHD Graphics for 10th Gen Intel Processors

Took some time to get the graphics acceleration, as well as HDMI to work fully, but they now both do. This CPU has the built in Intel UHD GPU, which should easily be able to drive 4K@60Hz in Windows 11. But, I can always only choose 2K resolution in display settings panel in Ventura.

So, looking forward to any answers, anything will help! Attached my current EFI-Folder.

please read the faq for proper hardware profile setup:

[FAQ] READ FIRST! Laptop Frequent Questions

This is an updated FAQ from the Original Thread: https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/post-1045259 Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum...

www.tonymacx86.com

can you set DVMT to 128MB in bios?

is dAGPM.kext really required?

 

[mysticfact]

There is no such setting in bios.

And I disabled dAGPM.kext but still no 4k option.

I set index 2 to HDMI. But it's still DP in Hackintool v4.0.3. Is this the cause of the problem?

 

[Feartech]

There is no such setting in bios.

And I disabled dAGPM.kext but still no 4k option.

View attachment 575379

I set index 2 to HDMIi Hackintool v4.0.3. But it's still DP. Is this the cause?

depends on the hardware i suppose......

 

[mysticfact]

I have this option in config.list.
<key>framebuffer-patch-enable</key>
<integer>1</integer>
<key>framebuffer-stolenmem</key>
<data>AAAwAQ==</data>
<key>framebuffer-fbmem</key>
<data>AACQAA==</data>

Should I force fix DVMT of bios(by modifying the firmware)?

 

[Feartech]

I have this option in config.list.
<key>framebuffer-patch-enable</key>
<integer>1</integer>
<key>framebuffer-stolenmem</key>
<data>AAAwAQ==</data>
<key>framebuffer-fbmem</key>
<data>AACQAA==</data>

your hardware profile is still not filled out

 

[mysticfact]

Sorry.
This is my EFI folder and ioreg file.

 

[Feartech]

Sorry.
This is my EFI folder and ioreg file.

please update your hardware profile to allow others to help you easier

https://www.tonymacx86.com/account/account-details

please read the faq for proper hardware profile setup:

[FAQ] READ FIRST! Laptop Frequent Questions

This is an updated FAQ from the Original Thread: https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/post-1045259 Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum...

www.tonymacx86.com

 

[Feartech]

Sorry.
This is my EFI folder and ioreg file.

recommended SMBIOS would be one of these (normally):
MacBookPro16,1 or MacBookPro16,3 or MacBookPro16,4

also add to your PciRoot(0x0)/Pci(0x2,0x0)

dpcd-max-link-rate -> 1E000000
enable-cdclk-frequency-fix -> 01000000
enable-dpcd-max-link-rate-fix -> 01000000
enable-max-pixel-clock-override -> 01000000

 

[mysticfact]

recommended SMBIOS would be one of these (normally):
MacBookPro16,1 or MacBookPro16,3 or MacBookPro16,4

also add to your PciRoot(0x0)/Pci(0x2,0x0)

dpcd-max-link-rate -> 1E000000
enable-cdclk-frequency-fix -> 01000000
enable-dpcd-max-link-rate-fix -> 01000000
enable-max-pixel-clock-override -> 01000000

I put in the all config and try three options.
Only, when I use MacBookPro16,3, HDMI is worked.
But, it is just 2k resolution.