I can not install the system on the GA-Z170MX-Gaming 5

[psydrug]

Hello everyone

I bought these parts
Motherboard: GA-Z170MX-Gaming 5 ver1.0 F20 bios
Memories: HX424C15FBK4 / 64
Processor: I7-6700K 4GHZ 8MB


I worked according to this guide
https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.200564/

And the BIOS settings of these

Windows Features: Other OS
Storage Boot: UEFI Only
Secure Boot: Disabled
Intel PPT: Disabled
XHCI Hand-off: Enabled
Super IO Configuration> Serial and Parallel Port - both Disabled
VT-D: Disabled
High Precision Timer: Disabled
IOAPIC 24-119 Entries: Disabled

I get an error
See Photo


What should I do? Or what am I doing wrong?


Thanks in advance

 

[psydrug]

Please I need your help

I'm Have entered into verbose mode
And that's the problem I'm getting here
See photos




Thanks in advance

 

[P1LGRIM]

Your picture shows "Still waiting for root device".

When installing this means that your USB flash drive cannot be found.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.

 

[psydrug]

Thank you very much for answering

With usb 2 it works better, I plugin up an external USB2 as the picture
Now there is another problem, it gets stuck in another place, Please see picture


What am I doing wrong now?


Thanks in advance

 

[P1LGRIM]

What am I doing wrong now?

If you are using your integrated HD 530 graphics see this thread.

 

[psydrug]

Thank you very much for answering

Yes I use an internal video card of motherboard HD 530

I did it, but I am with the same problem
Inject Intel = No or Inject Intel = Yes with ig-platform-id = 0x19120000.

<dict>
<key>Comment</key>
<string>10.11-SKL-1912000-4_displays</string>
<key>Find</key>
<data>
AQMDAw==
</data>
<key>Name</key>
<string>AppleIntelSKLGraphicsFramebuffer</string>
<key>Replace</key>
<data>
AQMEAw==
</data>
</dict>


I upload the file config.plist after all the changes


Thanks in advance

 

[psydrug]

I realized my problem, I'm up now installed the system with a USB flash disk USB3
I tried to install the USB Flash Disk USB2 and it worked

Now I have some problems
His card display black sometimes look at all sorts of places
I have attached a photo

For sound card is not working after installing kexts ALC1150
It is also about a network card, just do not look


please help me,

Thanks in advance



EDIT: After installing MultiBeast
The computer is restarting all the time
I took a picture of it