- Joined
- Sep 21, 2010
- Messages
- 13,414
- Motherboard
- HP 17" 17-by3053cl
- CPU
- i5-1035G1
- Graphics
- Intel UHD Graphics, 1920x1080
- Mac
- Classic Mac
- Mobile Phone
Please post help requests in the Monterey Desktop Support Forum section (not in this thread).
Pre Update Notes:
- This update may break some of your Monterey functions. Make sure you backup first.
Note: Before you update, make sure your USB ports are properly mapped. I recommend you use this procedure:
www.tonymacx86.com
Here's the step by step way to update OC:
Download OCAuxiliaryTools (OCAT):
https://github.com/ic005k/OCAuxiliaryTools
Follow the OCAT Guide:
https://github.com/5T33Z0/OC-Little-Translated/blob/main/D_Updating_OpenCore/README.md
After completing the Update, reboot.
Upon reaching the Desktop, open the Terminal and execute:
Confirm you have updated OC to 0.8.9 or newer.
Download the Monterey 12.6.5. Update from Apple's Mac App Store using System Preferences > Software Update, and run it - the updater will reboot upon completion.
Done! So far, another easy update!
Please post help requests in the Monterey Desktop Support Forum section (not in this thread).
Pre Update Notes:
- This update may break some of your Monterey functions. Make sure you backup first.
Note: Before you update, make sure your USB ports are properly mapped. I recommend you use this procedure:
The New Beginner's Guide to USB Port Configuration
Important Update: June 2023 From Big Sur 11.3 on the built-in OpenCore XhciPortLimit quirk no-longer worked as described. This became a known "bug", though in reality it was Apple changing their internal code, making a simple "peek and poke" to keep it operating, a difficult task. However, with...
www.tonymacx86.com
Here's the step by step way to update OC:
- Make sure you use the latest versions of the Lilu.kext, AppleALC.kext and WhateverGreen.kext.
Backup your current installation using Carbon Copy Cloner or SuperDuper;
Update to the latest Clover or OpenCore 0.8.9 or newer.
See the tonymacx86 Clover Builds (in Download menu) to update Clover. To update your OpenCore, see this guide. To convert from Clover to Open Core, see this guide.
See the tonymacx86 Clover Builds (in Download menu) to update Clover. To update your OpenCore, see this guide. To convert from Clover to Open Core, see this guide.
Download OCAuxiliaryTools (OCAT):https://github.com/ic005k/OCAuxiliaryTools
Follow the OCAT Guide:https://github.com/5T33Z0/OC-Little-Translated/blob/main/D_Updating_OpenCore/README.md
After completing the Update, reboot. Upon reaching the Desktop, open the Terminal and execute:
Code:
nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:opencore-versionNote: Update will reboot three times; each time Clover/OpenCore picks the correct boot partition. So, sit back and relax. The update takes 3 reboots and ~30 minutes to complete.
Please post help requests in the Monterey Desktop Support Forum section (not in this thread).