HS on Zotac Zbox MI553

[cmn699]

OK, see my bios setup:

Sorry pictures is upside down

• Thank you for uploading your BIOS screen shots.
  • The images will become right side up when clicked to enlarge; you may stop banging your head on the wall and break a good wall
• Some edited images uploaded for you to consider making changes.
  • Boot menu ALL OK
    
  • Serial Port should be DISABLED: that choice is not shown in the image.
  • Wake on LAN is Enabled-> can cause automatic reboot on Apple> Shut Down...!
  • Memory Cards are set Auto; this can cause "Non-system disk Error" during boot before entry to Clover Boot Manager[CBM] screen!

• If you experience any of the problems mentioned above, make sure you take a second look in the BIOS and make changes as appropriate and Save Changes and reboot.

I understood you have Intel Hd 630 and it has full QE/CI.
Your only problem now is Audio. Is that correct?
Do you know what Audio chipset is used on this Motherboard?Let me know.
Toleda's Audio guide will be the best way to handle Audio issues.

 

[yabba235]

• Thank you for uploading your BIOS screen shots.
  • The images will become right side up when clicked to enlarge; you may stop banging your head on the wall and break a good wall
• Some edited images uploaded for you to consider making changes.
  • Boot menu ALL OK
    
  • Serial Port should be DISABLED: that choice is not shown in the image.
  • Wake on LAN is Enabled-> can cause automatic reboot on Apple> Shut Down...!
  • Memory Cards are set Auto; this can cause "Non-system disk Error" during boot before entry to Clover Boot Manager[CBM] screen!

• If you experience any of the problems mentioned above, make sure you take a second look in the BIOS and make changes as appropriate and Save Changes and reboot.

I understood you have Intel Hd 630 and it has full QE/CI.
Your only problem now is Audio. Is that correct?
Do you know what Audio chipset is used on this Motherboard?Let me know.
Toleda's Audio guide will be the best way to handle Audio issues.

Ok, when back to home I find some mobo spec from linux live usb and posting here.

Yes, for now graphics work ok, but no audio over hdmi - in audio section in system properties is show only "composite device".
Next step will be run thunderbolt interface ( usb 3.1, maybe whit video out).

 

[cmn699]

Ok, when back to home I find some mobo spec from linux live usb and posting here.

Yes, for now graphics work ok, but no audio over hdmi - in audio section in system properties is show only "composite device".
Next step will be run thunderbolt interface ( usb 3.1, maybe whit video out).

• I would appreciate if you can upload images to enhance your communication.

If you have not already tried to get Audio from your Intel HD 630 HDMI , I am listing the steps from Toleda's Audio Guide. :

• Download Rehabman's : OS-X-Fake-PCI-ID / Downloads
  
• When you click that from your downloaded folder it will unzip into a same named folder.
• Open that folder to find 2 folders: [See attached composite image> top part ]
  • Debug
  • Release
• Click "Release" folder to find listed files inside[See bottom part of composite image uploaded]
  • 8 kexts
  • Select the 2 kexts I have enclosed in colored rectangle :
    • FakePCIID.kext and
    • FakePCIID_Intel_HD_HDMI_Audio.kext
  • Copy and paste the above 2 kexts to CLOVER/kexts/Other
  • Using Kext Wizard install the 2 kexts and run Maintenance to update cache.
  • Reboot
  • Test sound.
• If the above does not work, then you can try Toleda's Clover KernelAndKextPatches/KextsToPatch

 

[yabba235]

• I would appreciate if you can upload images to enhance your communication.

If you have not already tried to get Audio from your Intel HD 630 HDMI , I am listing the steps from Toleda's Audio Guide. :

• Download Rehabman's : OS-X-Fake-PCI-ID / Downloads
  
• When you click that from your downloaded folder it will unzip into a same named folder.
• Open that folder to find 2 folders: [See attached composite image> top part ]
  • Debug
  • Release
• Click "Release" folder to find listed files inside[See bottom part of composite image uploaded]
  • 8 kexts
  • Select the 2 kexts I have enclosed in colored rectangle :
    • FakePCIID.kext and
    • FakePCIID_Intel_HD_HDMI_Audio.kext
  • Copy and paste the above 2 kexts to CLOVER/kexts/Other
  • Using Kext Wizard install the 2 kexts and run Maintenance to update cache.
  • Reboot
  • Test sound.
• If the above does not work, then you can try Toleda's Clover KernelAndKextPatches/KextsToPatch

You mean I must install this kext on my real macOS disk ?
Put in Clover's folders is not enough ?

OK, this method not work.

I trying enable "UseIntelHDMI" in Devices tap in Clover Configurator, but this enable me display port audio output, witch not work ( I use hdmi port ).

I hear about AppleACL.kext but I don't know how use it, tutorial is to hard.

 

[yabba235]

Ok, here iss output from lspci and lsusb under ubuntu lived
An add boot log from macOS.

 

[Khmusi]

Hi yabba235,
My Mac mini from 2011 has a technical fault.
I am a newcomer respective Hackintosh Systems. But Can You confirm, that the Zotac553 is in its entirety working for OSX 10.13? Can you give a buy recommendation for this product under this configuration?

Trank yo very much for help

Klemens

 

[lgolias81]

Hi Guys, can someone confirm that the TB3 is running. Need it for an audio inteface via TB. Would like to know before buying the Zotac thanks a lot.