Contribute
Register

HP Envy 17-J044CA- Hard drive not showing in disk utility installer

Status
Not open for further replies.
akash227

akash227

Joined
Oct 8, 2011
Messages
208
Motherboard
GA-Z170X-UD3
CPU
i7-6700K
Graphics
HD 530
Mac
  1. iMac
  2. MacBook
Hey so I followed the Yosemite clover guide for HP Probooks and it boots into the Yosemite installer fine, but when I go to disk utility none of my hard drives appear only the USB drive. I was wondering how I could fix this so I can install Yosemite.
 
akash227 said:
Thanks finally installed it and got it to boot up but the graphics are extremely slow, I have dual gpu (GeForce 740m,intel hd 4600) How can I fix this.
Click to expand...

http://www.tonymacx86.com/yosemite-...-installation-guide-clover-hd4600-mobile.html

Also my beats audio isn't working anymore
Click to expand...

Audio: Best result with patched AppleHDA. Google 'patch AppleHDA guide'. Search for suitable AppleHDA or patch it yourself. Apply appropriate DSDT patches.

DSDT patches you need for AppleHDA: https://github.com/RehabMan/Laptop-DSDT-Patch
Apply: "Audio Layout 12" (change layout-id from 12 to the layout-id used by the patched AppleHDA)
Apply: "IRQ Fix"

Determine layout-id from patched AppleHDA.kext:

First you need to know your codec id in decimal. Then look in the Info.plist for AppleHDAHardwareConfigDriver.kext (in PlugIns), find your codec id under HDAConfigDefault (there may be many entries in a sloppy patched AppleHDA or only one). The LayoutID that matches your codec id is the layout id you need.
 
RehabMan said:
http://www.tonymacx86.com/yosemite-...-installation-guide-clover-hd4600-mobile.html



Audio: Best result with patched AppleHDA. Google 'patch AppleHDA guide'. Search for suitable AppleHDA or patch it yourself. Apply appropriate DSDT patches.

DSDT patches you need for AppleHDA: https://github.com/RehabMan/Laptop-DSDT-Patch
Apply: "Audio Layout 12" (change layout-id from 12 to the layout-id used by the patched AppleHDA)
Apply: "IRQ Fix"

Determine layout-id from patched AppleHDA.kext:

First you need to know your codec id in decimal. Then look in the Info.plist for AppleHDAHardwareConfigDriver.kext (in PlugIns), find your codec id under HDAConfigDefault (there may be many entries in a sloppy patched AppleHDA or only one). The LayoutID that matches your codec id is the layout id you need.
Click to expand...

Ok so regarding the graphics I'm using the config.plist for HD4400/4600 that was provided in the clover folder, I got it from the HP Probook guide so shouldn't it work.

I followed the guide and applied the patches but I don't understand what I have to do with this:

Name: AppleIntelHD5000Graphics
find: 3D868012047410EB5D
repl: 3D868016047410EB5D

Name: AppleIntelFramebufferAzul
find: 3D86801204
repl: 3D86801604

Devices/FakeID/IntelGFX=0x04128086
Graphics/Inject/Intel=Yes
Graphics/ig-platform-id=0x0a260006
 
akash227 said:
Ok so regarding the graphics I'm using the config.plist for HD4400/4600 that was provided in the clover folder, I got it from the HP Probook guide so shouldn't it work.
Click to expand...

HD4400 and HD4600 are not the same...

I followed the guide and applied the patches
Click to expand...

What patches?

but I don't understand what I have to do with this:

Name: AppleIntelHD5000Graphics
find: 3D868012047410EB5D
repl: 3D868016047410EB5D

Name: AppleIntelFramebufferAzul
find: 3D86801204
repl: 3D86801604

Devices/FakeID/IntelGFX=0x04128086
Graphics/Inject/Intel=Yes
Graphics/ig-platform-id=0x0a260006
Click to expand...

The above is what you need to add to your config.plist. Such as: http://www.tonymacx86.com/attachmen...probook-450-g1-config_hd4600_mobile.plist.zip
 
Hmm it doesn't boot up at all when I add those lines in to my config.plist or when I use the one you provided. It just shows the black apple screen with no loading bar
 
akash227 said:
Hmm it doesn't boot up at all when I add those lines in to my config.plist or when I use the one you provided. It just shows the black apple screen with no loading bar
Click to expand...

You also need nv_disable=1 (because of nvidia) and perhaps dart=0 (because of VT-d) in Boot/Arguments. Also, if you have "Local APIC" panic, you need KernelAndKextPatches/KernelLapic=true.

You should boot verbose for troubleshooting.

Also, be aware that booting the installer is not quick.
 
RehabMan said:
You also need nv_disable=1 (because of nvidia) and perhaps dart=0 (because of VT-d) in Boot/Arguments. Also, if you have "Local APIC" panic, you need KernelAndKextPatches/KernelLapic=true.

You should boot verbose for troubleshooting.

Also, be aware that booting the installer is not quick.
Click to expand...

I'll add those lines and see if it helps and it's not for the installer usually when I boot in with my normal config.plist theres a loading bar that appears but with yours theres none at all it just stays at a black screen. A bit of a nooby question but i've always used Chameleon so I don't know how to boot into verbose mode with Clover
 
akash227 said:
... so I don't know how to boot into verbose mode with Clover
Click to expand...

Hit spacebar instead of enter when you boot and it will be obvious.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top