How to use both NICs on GA-Z87N-WIFI

[opaque]

Hi all

how can I use both NICs on a GA-Z87N-WIFI board?
Eg.:
NIC1: 192.168.1.10/255.255.255.0/192.168.1.1
NIC2: 10.0.1.10/255.255.255.0/10.0.1.1

Only the right one is working. No flashing light if I connect the cable to the left one. I also tried it before startup.

I don´t want to activate them simultan. But both should be connected and I will active/deactive it under system setting.

I own a real MacPro 4,1 too where I switch between this to LANs.

MacOS 10.9.1

thx opaque

 

[opaque]

Ok, both nics are working but no flash on the right NIC. IS this normal on hackintoshs or a defect NIC on the motherboard?

 

[opaque]

[SOLVED] How to use both NICs on GA-Z87N-WIFI

Now I have installed the Atheros - Shailua´s Network driver too (with MultiBeast) and all NICs are flashing.

opaque