Hiwa's Build:GA-Z77X-UD5H 3770K MSI R6850 GSKILL 8GB 2400

hiwa · Jul 2, 2012

Hiwa's Build: GA-Z77X-UD5H | Core i7-3770K | MSI R6850 Cyclone 1GD5 Power Edition/OC | Lian Li PC-A7010

It's a small nice biuld for After Effects and Premier Pro CS5 .

Using GSKILL 2400 for higher performance timings are tight enough and stable 10.12.12.31.1t .

Installation
Using F8D Bios, nothing change in bios only changing Memory frequency to 2400 and change the timings were loose
Set manually VDIMM and CPU VTT to 1.65 and 1.05 (the bad bios board set them 1.15 for vtt and 1.68 for memories if leave Auto), better if you set everything manually with gigabyte boards to have better performance, the board set all secondary and third timing really loose or set them bad (this part need a bit overclocking knowledge)

i have 10.7.3 Lion so install first with unibeast 1.3 and BD 4.0.1 (the only combination works perfect if you use other versions system can't detect you HDD)

How to :
http://tonymacx86.blogspot.cz/2011/10/unibeast-install-mac-os-x-lion-using.html

when installing finished go with Tony guide

viewtopic.php?f=54&t=59052

after booting with USB and then chooses HDD you can access Lion
Install only one of the Lan Drivers Via multi beast 4.6.1 ( i installed Atheros )
Reboot, booth with USB again and then choose HDD
Check For update install 10.7.4 and reboot again with usb then HDD

Install Bridgehelper 5 on you HDD (works only with 10.7.4)
Reboot
Open MultiBeast
Check userDSDT
Audio ALC8XXHDA
Reboot

Go to http://www.tonymacx86.com/viewtopic.php?f=16&t=63854
Copy Interim Realtek Ivy Bridge Lion AppleHDA and KextBeat into the desktop and run KextBeast
Go to System preferences > Audio then in output change internal Speaker to Line Out (Green)

to having Sleep/Shutdown works you have to

SSD SATA2 plugged in GRAY sata ports
1 X HDD SATA3 plugged in White
1 X bluray Plugged in Black Sata ports

Info
IvyBridge system performance is 20% Memory frequency and nice timings, try to run Geekbench or Cinebench CPU with memories over 2400 to see the real difference

GeekBench Score default CPU and 2400MHz Memory Frequency

Luxmark CPU and GPU all default

Cinebench all default

hiwa · Jul 2, 2012

4500MHz and 2400 memories

mmm not bad with intel stock cooling system running cold

luxmark gain is small

hiwa · Jul 2, 2012

Same freq but ram at 2666MHz

Djarum02 · Jul 3, 2012

The grey ports are not the intel ports. The white and black are.

tonymacx86 · Jul 3, 2012

Nice one Hiwa- this build is a scorcher. :headbang:

hiwa · Jul 4, 2012

Djarum02 said:
The grey ports are not the intel ports. The white and black are.

they are Marvell , to have sleep/shutdown working i should connect one hdd to one of marvell ports.

thelostswede · Jul 4, 2012

Or you could just disable the Marvell controller in the UEFI... :ugeek:

hiwa · Jul 4, 2012

thelostswede said:
Or you could just disable the Marvell controller in the UEFI...

thanks works :thumbup:

spoli · Jul 4, 2012

Nice Build.

hackintosh1997 · Jul 4, 2012

4.5ghz with intel stock cooler? how many volts are you using? good job btw! :headbang:

Search

Hiwa's Build:GA-Z77X-UD5H 3770K MSI R6850 GSKILL 8GB 2400

hiwa

hiwa

hiwa

Djarum02

tonymacx86

Administrator

hiwa

thelostswede

hiwa

spoli

hackintosh1997

Forum

Guides

Downloads