High Sierra on Cube Thinker Kaby Lake M3-7 M30

[lightmain]

I am using a slightly minor laptop.
I could use Clover and install it on the hard disk.
However, the graphic is not enough 22 MB.
Also, audio, touch panel, camera, Bluetooth are not recognized.

First of all, I'd like to successfully install graphics.
I tried to modify config.plist, add KEXT etc, but I am not going.

Please tell me the solution.
Thank you.

[Reference] PC spec
CPU: Intel Core m3-7Y30
Graphics chipset: Intel HD Graphics 615
RAM: 8 GB
Hard disk memory: 256 GB SSD
Screen size: 13.5 inches
Screen resolution: 3000 x 2000

thinker,32MB,DVMT-prealloc,m37y30

 

[RehabMan]

I am using a slightly minor laptop.
I could use Clover and install it on the hard disk.
However, the graphic is not enough 22 MB.
Also, audio, touch panel, camera, Bluetooth are not recognized.

First of all, I'd like to successfully install graphics.
I tried to modify config.plist, add KEXT etc, but I am not going.

Please tell me the solution.
Thank you.

[Reference] PC spec
CPU: Intel Core m3-7Y30
Graphics chipset: Intel HD Graphics 615
RAM: 8 GB
Hard disk memory: 256 GB SSD
Screen size: 13.5 inches
Screen resolution: 3000 x 2000

thinker,32MB,DVMT-prealloc,m37y30View attachment 343547 View attachment 343548

See guide for correct plists:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[lightmain]

I read the manual and tried it below, but it will not solve it.
I think there is a missing setting, so please tell me

1. Reselect Kext (based on updating whatevergreen.kext)
EFI / CLOVER / kexts / Other /
　· FakePCIID_Intel_HD_Graphics.kext
　· FakePCIID.kext
　· FakeSMC.kext
　· Lilu.kext
　· USBInjectAll.kext
　· VoodooHDA.kext
　· VoodooPS 2 Controller.kext
　· WhateverGreen.kext
　· XHCI - 200 - series - injector.kext
　(IntelGraphicsDVMTFixup.kext was integrated into
　whateverGreen.kext, so it is not selected)

2. With SMBIOS, reselect to MacBook 10.1 → MacBook 9.1
→ As a result, webcam, sound, Bluetooth became available now.

3. In BIOS, confirm that DVMT-prealloc is 32 MB
　(64 MB can be selected, but it will not start)

4. Launch using invalid ig-platform-id (0x12345678) in 4.clover config.plist. Rebuild cache (sudo kextcache -i /)

5. Set ig-platform-id (0x591e0001), FAKEID-INTELGFX (19168086) and restart.

6. The graphic remains 22 MB.

 

[RehabMan]

5. Set ig-platform-id (0x591e0001), FAKEID-INTELGFX (19168086) and restart.

Wrong.
You cannot use a KabyLake ig-platform-id with Skylake device-id.

6. The graphic remains 22 MB.

As you should expect given the input you mentioned above.

 

[lightmain]

intel　HD　Graphcis　KBL　CRB　1536MB　

It will be displayed.
How can I fix it correctly (HD 615)?

 

[RehabMan]

intel　HD　Graphcis　KBL　CRB　1536MB　

It will be displayed.
How can I fix it correctly (HD 615)?

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[Sniki]

@lightmain what Audio Codec does your laptop have, what Lan does your laptop have.

Attach problem Reporting as @RehabMan said in order to help you.

Use this config.plist and remove all other kexts and leave only these ones that I attached
Also add this SSDT to ACPI/Patched

See if you get QE/CI

 

[lightmain]

Sorry for being late.
I will upload EFI.

In summary of symptoms,
(1) The graphic display is "intel HD Graphcis KBL CRB 1536 MB"
(2) Can not display battery status
(3) Bluetooth and internal camera are not recognized (However, it can be recognized by changing SMBIOS to MacBook 9.1)
(4) The touch pad does not recognize it.
(5) Do not return from sleep
(6) imessage can not be used (error in activation)

Although the destination is long, I will do my best.

 

[RehabMan]

Sorry for being late.
I will upload EFI.

In summary of symptoms,
(1) The graphic display is "intel HD Graphcis KBL CRB 1536 MB"
(2) Can not display battery status
(3) Bluetooth and internal camera are not recognized (However, it can be recognized by changing SMBIOS to MacBook 9.1)
(4) The touch pad does not recognize it.
(5) Do not return from sleep
(6) imessage can not be used (error in activation)

Although the destination is long, I will do my best.

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[lightmain]

is this OK?

There are indications that the file is insufficient
It has been deleted.