High sierra not recognizing HDD

[nycety]

Hello guys!,

i am pretty much new to this whole scene, and am having a little trouble. I followed the steps for setting up unibeast and ended up at a dead end, i try installing high sierra and my hard disk is not showing!! i can't even delete my hard drive in the disc utility please someone help.

Btw I've tried changing the AHCI, and tried installing clover but it still fails.

thanks in advance,

 

[neilhart]

Hello guys!,

i am pretty much new to this whole scene, and am having a little trouble. I followed the steps for setting up unibeast and ended up at a dead end, i try installing high sierra and my hard disk is not showing!! i can't even delete my hard drive in the disc utility please someone help.

Btw I've tried changing the AHCI, and tried installing clover but it still fails.

thanks in advance,

This is one of the old motherboards that originally had a Legacy BIOS. And there is a beta UEFI BIOS available.

So you need to understand which BIOS version you have to know how to build your Unibeast installer device.

Good modding,
neil

 

[nycety]

ok i updated m

This is one of the old motherboards that originally had a Legacy BIOS. And there is a beta UEFI BIOS available.

So you need to understand which BIOS version you have to know how to build your Unibeast installer device.

Good modding,
neil

ok so now i updated my bios to .u1h and been going through some tutorials with the exact bios and cpu as mine which is:
GA-Z68X-UD3H-B3 REV: 1. 3.
and now when i start unibeast it is stuck on the apple before booting unibeast.

 

[neilhart]

ok i updated m


ok so now i updated my bios to .u1h and been going through some tutorials with the exact bios and cpu as mine which is:
GA-Z68X-UD3H-B3 REV: 1. 3.
and now when i start unibeast it is stuck on the apple before booting unibeast.

The "unibeast" is an application used to build an USB macOS installer device. You would then boot to the installer device.

However please use this guide: https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.235474/ and share the Step number where you are having this problem. You should use the -v boot argument so that you can see where the boot process fails.

Good modding,
neil

 

[nycety]

The "unibeast" is an application used to build an USB macOS installer device. You would then boot to the installer device.

However please use this guide: https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.235474/ and share the Step number where you are having this problem. You should use the -v boot argument so that you can see where the boot process fails.

Good modding,
neil

Hey neil thanks for your help so far,

Everything is working well so far!!…But i install high sierra and now check this out >>> <<<<this is what happen when i start high sierra from the usb, and if i don't start without the usb a can't find mach error pops up.

 

[nycety]

Hey neil thanks for your help so far,

Everything is working well so far!!…But i install high sierra and now check this out >>> View attachment 312657 View attachment 312658 View attachment 312659 View attachment 312660 <<<<this is what happen when i start high sierra from the usb, and if i don't start without the usb a can't find mach error pops up.

The screen is all distorted when i start mac os high sierra from the clover menu, and if i start it with out the usb it gives me a can't find mach kernel error

 

[neilhart]

The screen is all distorted when i start mac os high sierra from the clover menu, and if i start it with out the usb it gives me a can't find mach kernel error

This maybe your GT 430 card; I have not seen this problem before but is known here https://www.tonymacx86.com/threads/nvidia-gt430.233311/

Good modding,
neil

 

[nycety]

This maybe your GT 430 card; I have not seen this problem before but is known here https://www.tonymacx86.com/threads/nvidia-gt430.233311/

Good modding,
neil

thank you for all your help neihart!!,

I just decided to go with normal sierra until later on in the year, everything is working fine except the mach kernel error is stopping my Hard drive from loading up!! any idea how to help me with that?