High Sierra - Lenovo Yoga 13 Black Screen

[RehabMan]

...

You forgot to press F2: misc/preboot.log is missing.
Same goes for F2 and ACPI/origin.
Please read "Problem Reporting" carefully.

 

[lcktom]

You forgot to press F2: misc/preboot.log is missing.
Same goes for F2 and ACPI/origin.
Please read "Problem Reporting" carefully.

Please find the attached. Both failed to boot in verbose mode

 

[RehabMan]

Please find the attached. Both failed to boot in verbose mode

You should try AptioMemoryFix.efi.
Make sure you're using a USB2 stick and try all USB ports.
Check BIOS settings.

Your preboot.log indicates you didn't follow the guide (no install_osx partition).
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[lcktom]

You should try AptioMemoryFix.efi.
Make sure you're using a USB2 stick and try all USB ports.
Check BIOS settings.

Your preboot.log indicates you didn't follow the guide (no install_osx partition).
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

I had also tried using AptioMemoryFix.efi Without success. Please find the attached. As mentioned before, when Booting El Captain, i can see the below message.

Verbose boot also failed.

Checked BIOS and disabled Fast boot also not working.

Renamed the install_osx already.

 

[RehabMan]

I had also tried using AptioMemoryFix.efi Without success. Please find the attached. As mentioned before, when Booting El Captain, i can see the below message.

Verbose boot also failed.

Checked BIOS and disabled Fast boot also not working.

Renamed the install_osx already.

As per guide, you may need to set config.plist/SMBIOS/Memory to match your system's memory configuration.
You will need to refer to the Clover documentation.

 

[lcktom]

As per guide, you may need to set config.plist/SMBIOS/Memory to match your system's memory configuration.
You will need to refer to the Clover documentation.

Thanks so much!!!

After configuring the SMBIOS/Memory, I can see the loading bar and then to language selection.

 

[ChannelZer0]

Hey lcktom, I have the same laptop as you that I would like to make into a hackintosh. I haven't been able to get this working yet, and I can only boot OSX from booting from the USB I created. I was able to get OSX installed but I cant boot to it directly, I must boot off the USB installer. I don't know much about clover or smbios/memory. Can you please help me?

 

[RehabMan]

Hey lcktom, I have the same laptop as you that I would like to make into a hackintosh. I haven't been able to get this working yet, and I can only boot OSX from booting from the USB I created. I was able to get OSX installed but I cant boot to it directly, I must boot off the USB installer. I don't know much about clover or smbios/memory. Can you please help me?

See guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/