- Joined
- Jan 14, 2018
- Messages
- 20
- Motherboard
- ASUS STRIX Z270G GAMING
- CPU
- i7-7700K
- Graphics
- GTX 1070
- Mac
- Mobile Phone
Hi guys,
I'm new to Hackintosh and of course I have problems ;-)
Just bought the following HW:
Asus Z270G
i7-7700
Samsung 960 Evo NVMe M.2 500GB SSD
Gigabyte GeForce GTX 1070 G1 Gaming
Dell 24" 4k monitor
Followed exactly the installation guide (incl. recommended BIOS config) and tried to install El Capitan. But the computer reboots after showing for a few seconds the apple logo. I tried different options and BIOS setup found here and there but no success (-v -x -cpus=1 -nvdisable=1 GraphicsEnabler...)
In some other treads it is suggested to change the Execute Memory Protect (sometime called differently), but my BIOS does not have this option (the motherboard manual shows an option called "Execute Disable Bit" but this does not appear in my BIOS).
I also tried the Big List of Solutions (Replace VBoxHfs-64.efi with HFSPlus.efi in EFI/CLOVER/drivers64UEFI/), but nothing.
It just reboots after the "+++++++++++++++++++++++++++++++++++..." (in -v mode)
Thanks a lot for any help you can provide!
EDIT:
I also tried without the graphic card installed
I also tried with only 1 RAM module (8GB)
I'm new to Hackintosh and of course I have problems ;-)
Just bought the following HW:
Asus Z270G
i7-7700
Samsung 960 Evo NVMe M.2 500GB SSD
Gigabyte GeForce GTX 1070 G1 Gaming
Dell 24" 4k monitor
Followed exactly the installation guide (incl. recommended BIOS config) and tried to install El Capitan. But the computer reboots after showing for a few seconds the apple logo. I tried different options and BIOS setup found here and there but no success (-v -x -cpus=1 -nvdisable=1 GraphicsEnabler...)
In some other treads it is suggested to change the Execute Memory Protect (sometime called differently), but my BIOS does not have this option (the motherboard manual shows an option called "Execute Disable Bit" but this does not appear in my BIOS).
I also tried the Big List of Solutions (Replace VBoxHfs-64.efi with HFSPlus.efi in EFI/CLOVER/drivers64UEFI/), but nothing.
It just reboots after the "+++++++++++++++++++++++++++++++++++..." (in -v mode)
Thanks a lot for any help you can provide!
EDIT:
I also tried without the graphic card installed
I also tried with only 1 RAM module (8GB)
Last edited: