Help with booting issue

[brianwong11031]

stuck at IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0

 

[Feartech]

View attachment 364796 stuck at IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0

your graphics are not supported on Mojave

best bet is to use high Sierra

 

[brianwong11031]

your graphics are not supported on Mojave

best bet is to use high Sierra

This issue appears even high Sierra.

 

[Feartech]

This issue appears even high Sierra.

https://www.tonymacx86.com/threads/macos-10-12-5-update.220866/#post-1504116

 

[brianwong11031]

https://www.tonymacx86.com/threads/macos-10-12-5-update.220866/#post-1504116

Sure, I’ve installed both of them.
And it stuck at Sound assertion in AppleHDADrover at line 216 now

 

[Feartech]

Sure, I’ve installed both of them.
And it stuck at Sound assertion in AppleHDADrover at line 216 now

actually you can just use the latest version of lilu and whatevergreen kexts

use boot argument nv_disable=1

assume you are trying high sierra now?

if so i will move this thread for you

 

[brianwong11031]

Sure. You can move this thread.
I’ve installed the latest version of those drivers but still not working.

actually you can just use the latest version of lilu and whatevergreen kexts

use boot argument nv_disable=1

assume you are trying high sierra now?

if so i will move this thread for you

 

[P1LGRIM]

Does your motherboard support native NVRAM ? - Test
Are you booting Legacy or UEFI ?

 

[CuriousMac]

View attachment 364796 stuck at IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0

Does your motherboard support native NVRAM ? - Test
Are you booting Legacy or UEFI ?

Had the exact same issue, it was solved by enabling Nvidia Web Drivers after using boot arg "nv_disable=1". although you will have to remove any Inject Nvidias etc. Only set it to use the Web Drivers within the config.plist and I set "nada_drv=1"

You will have the most redundant time of your life getting that perfect config to boot with Nvidia web drivers.

NOTE: First check NVRAM support as it will be needing a few .kexts. If you natively support nvram no need to worry about Emulating the vram.

 

[brianwong11031]

Does your motherboard support native NVRAM ? - Test
Are you booting Legacy or UEFI ?

I don’t know about NVRAM
My board is p8h61-m lx
I’m using EFI boot mode.