- Joined
- Apr 4, 2020
- Messages
- 3
- Motherboard
- ASUS H97-PRO
- CPU
- v3-1231
- Graphics
- Gtx 1070
- Mac
- Classic Mac
- Mobile Phone
Dear:
Hi, I am new to this forum and a rookie of the Hackintoshi, I looked up several threads and managed to pass the installment process without problems.
But I am having trouble while booting from disk which I installed the High Sierra 10.13.6
When it was loading the system , the process bar stuck and I used verbose mode to take a look at what caused the stop.
The messages appears to be "Sound Assertion in AppleHDADriver at line 1054"
My system spec is
CPU: Intel Xeon CPU E3-1231 v3
Motherboard: Asus H97-Pro
Graphic Card: Geforce GTX 1070
HDD: Crucial MX300 525gb
Clover version is 5107
These are the booting options that I chose to boot from HDD
My bios setting is as following :
Sata Mode : AHCI
Intel Virtualization Technology : Enabled
CFG Lock: Disabled
Fast Boot : Enabled
Primary Display: Auto
Lagacy USB Support: Enabled
Serial Port: Disabled
Secure Book : Disabled
OS Type: Other OS
EHCI Handoff : Enabled
Intel xHCI Mode: Smart Auto
I am using Transcend 64gb USB 2.0 plugged into a USB 2.0 Port to install the MacOS
Thank you and hope anyone could help me!!
Hi, I am new to this forum and a rookie of the Hackintoshi, I looked up several threads and managed to pass the installment process without problems.
But I am having trouble while booting from disk which I installed the High Sierra 10.13.6
When it was loading the system , the process bar stuck and I used verbose mode to take a look at what caused the stop.
The messages appears to be "Sound Assertion in AppleHDADriver at line 1054"
My system spec is
CPU: Intel Xeon CPU E3-1231 v3
Motherboard: Asus H97-Pro
Graphic Card: Geforce GTX 1070
HDD: Crucial MX300 525gb
Clover version is 5107
These are the booting options that I chose to boot from HDD
My bios setting is as following :
Sata Mode : AHCI
Intel Virtualization Technology : Enabled
CFG Lock: Disabled
Fast Boot : Enabled
Primary Display: Auto
Lagacy USB Support: Enabled
Serial Port: Disabled
Secure Book : Disabled
OS Type: Other OS
EHCI Handoff : Enabled
Intel xHCI Mode: Smart Auto
I am using Transcend 64gb USB 2.0 plugged into a USB 2.0 Port to install the MacOS
Thank you and hope anyone could help me!!