Help: rear USB-Ports, DSDT.aml @ Fujitsu Esprimo E5730 SFF

[Mike7-7-7]

So all coming with Clover are not 3rd, right?

 

[Feartech]

So all coming with Clover are not 3rd, right?

no

all kexts YOU install yourself are 3rd party

FakeSMC, lilu, whatevergreen, etc etc etc are 3rd party kexts

 

[Mike7-7-7]

Ok, but EFI-Folder "Others" can not be obsolete because it is necessary for Installation.

So

1. For OS-Installation You have to put all kexts to "Others" and
2. After Installation You have move them to LE

Now right?

 

[Mike7-7-7]

@Mods: May You please move this Thread to HS -> Post Installation -> General Help? Thanks!

 

[Feartech]

Ok, but EFI-Folder "Others" can not be obsolete because it is necessary for Installation.

So

1. For OS-Installation You have to put all kexts to "Others" and
2. After Installation You have move them to LE

Now right?

only essential kexts belong in other

and ALL kexts go in /Library/Extensions (while keeping essential in other)

you will find you have kexts in both places which is fine

all this is in the link i linked you on the other page

 

[Mike7-7-7]

Ok, thanks!

Put them all to LE but unfortunately did not help to solve the USB-Port problem.

 

[Feartech]

Ok, thanks!

Put them all to LE but unfortunately did not help to solve the USB-Port problem.

[Guide] Creating a Custom SSDT for USBInjectAll.kext

Overview One of the serious issues most users will face with 10.11.x (and later, including 10.12.x) is the new USB stack in OS X/macOS. It has a much heavier reliance on ACPI, and as a result is much more likely to expose bugs in your ACPI implementation of _PLD, and _UPC. It is covered in...

www.tonymacx86.com

 

[Mike7-7-7]

Thanks, but this is too complicated for me ...

 

[Mike7-7-7]

Now got Audio working with VoodooHDA drivers over KextBeast.
Used version 2.9.0d10.

P.S.: Tried mirones AppleALC-Patcher (Codec ALC663v1 and ALC663v2 without success; Injected ID 2 or 5; Installed HDAenabler, CodecCommander and HDAdriver kexts)

 

[Mike7-7-7]

Now ACPI-Errors are gone and 2 more USB-Ports are working with the two files at ZIP attached.

Maybe someone would like to help to get the remaining 4 Ports working?

(please see all Information at Post #1)