Contribute
Register

Help MB MSIZ270I Gaming Pro Carbon AC + Intel Core i7 7700

Status
Not open for further replies.
Joined
Aug 18, 2017
Messages
4
Hallo, I have problem to start installation with a Motherboard MSI Z20I Gaming Pro Carbon AC with Intel i7 7700, I try to set bios with user guide but don't start installation.

The sistem boot from UEFI USB Drive with Mac OS Sierra, start blinking with apple logo on the monitor, and after few seconds the USB stop Blinking (red light ON), and the installation will stop.

In the BIOS Setup, as your guide I was change :

1. Load Optimized Defaults
2. Set Overclocking/CPU Features/CFG Lock to Disabled
3. Set Overclocking/CPU Features/VT-d to Disabled
4. Save configuration and reset

System :

MB MSI Z270I Carbon AC
Intel i7 7700
2 x 16 Gb. Crucial Ballistix Sport LT
Samsun 850 EVO 250 Gb
PSUs Corsair TX650M
Case Cooler Master Elite 130

Excuse my English.

Best regards
 
Last edited:
Hallo, I have problem to start installation with a Motherboard MSI Z20I Gaming Pro Carbon AC with Intel i7 7700, I try to set bios with user guide but don't start installation.

The sistem boot from UEFI USB Drive with Mac OS Sierra, start blinking with apple logo on the monitor, and after few seconds the USB stop Blinking (red light ON), and the installation will stop.

In the BIOS Setup, as your guide I was change :

1. Load Optimized Defaults
2. Set Overclocking/CPU Features/CFG Lock to Disabled
3. Set Overclocking/CPU Features/VT-d to Disabled
4. Save configuration and reset

System :

MB MSI Z270I Carbon AC
Intel i7 7700
2 x 16 Gb. Crucial Ballistix Sport LT
Samsun 850 EVO 250 Gb
PSUs Corsair TX650M
Case Cooler Master Elite 130

Excuse my English.

Best regards


have look if this helps https://www.tonymacx86.com/threads/help-bios-msi-z170a-gaming-m7-motherboard.231858/ just look down
 
Hallo, I have problem to start installation with a Motherboard MSI Z20I Gaming Pro Carbon AC with Intel i7 7700, I try to set bios with user guide but don't start installation.

The sistem boot from UEFI USB Drive with Mac OS Sierra, start blinking with apple logo on the monitor, and after few seconds the USB stop Blinking (red light ON), and the installation will stop.

In the BIOS Setup, as your guide I was change :

1. Load Optimized Defaults
2. Set Overclocking/CPU Features/CFG Lock to Disabled
3. Set Overclocking/CPU Features/VT-d to Disabled
4. Save configuration and reset

System :

MB MSI Z270I Carbon AC
Intel i7 7700
2 x 16 Gb. Crucial Ballistix Sport LT
Samsun 850 EVO 250 Gb
PSUs Corsair TX650M
Case Cooler Master Elite 130

Excuse my English.

Best regards
change Wake up event by to OS
and in windows os configuration Disable windowns 8.1 and windows 7 installation
 
@SectorCB, please update your profile (personal details) with your Motherboard or Make/Model, CPU and Graphics Card.
The Rules said:
Profiles need to contain at least your primary system to assist others with helping you.

Boot your system in Verbose Mode and post a picture of your screen when it freezes/hangs.
At Clover Boot Screen press space bar and select Verbose (-v)
 
Status
Not open for further replies.
Back
Top