<< Solved >> Help installation Monterey 10700 and intel 630 gpu

[ka82]

Hi guys, I created EFI file with opencore.. I follow the tutorial, buth when I put usb key in my PC and i press to macOS install, I see the installation starting, but after 2 minutes in the display I read NO SIGNAL, but the PC is turned on.. why??? I'm so confused.. I tried an EFI file, found on the web, and when start the installation, in the Display appear connect your mouse, but the usb wireless tool is in the usb port... I chancge usb port but it's the same thing...

someone have this configuration, or similar, can send me EFI file and I try with that, please?

Thanks so much

 

[P1LGRIM]

but after 2 minutes in the display I read NO SIGNAL, but the PC is turned on.. why???

Incorrectly configured graphics.

With your 6700 XT you should use the boot argument agdpmod=pikera .

 

[ka82]

Incorrectly configured graphics.

With your 6700 XT you should use the boot argument agdpmod=pikera .

I know, I choice iGPU and not dGPU

 

[ka82]

Seccess!!! The problem was from the BIOS

 

[ka82]