- Joined
- Feb 2, 2015
- Messages
- 27
- Motherboard
- Dell Latitude E7440
- CPU
- i5-4310U
- Graphics
- HD 4400
- Mac
- Mobile Phone
Hi,
I tried to install High Sierra on my Asus Z10PE-D8-WS by following this tuto for my BIOS configuration:
Big Bertha's Big Brother:Asus Z10PE-D8 WS Dual Xeon Broadwell v4 CPU's 64GB DDR4 ECC RDIMM RAM
and i used this EFI for Z10PE-D16-WS because it uses all the same config like mine except the number of RAM slots (cheapset and others stuff).
Unfortunately it stucks at this point when i add "nv_disable=1" boot arg to Clover:
I tried without changing anything and it stuck at this point:
My Config is
Mobo: Asus Z10PE-D8-WS (C612 cheapset)
CPU: Intel Xeon E5-2630 v4 2.20 Ghz (10 cores; 20 threads)
Ram: 64GB
SSD: Crucial 1To
HDD: 4x 2To
GPU: GTX 1080 8GB
PSU: Corsair 1500W
I searched on Google but found nothing. I really need your help to fix this issue!
NB: EFI i used attached and another pictures to help you helping me perhaps...
I tried to install High Sierra on my Asus Z10PE-D8-WS by following this tuto for my BIOS configuration:
Big Bertha's Big Brother:Asus Z10PE-D8 WS Dual Xeon Broadwell v4 CPU's 64GB DDR4 ECC RDIMM RAM
and i used this EFI for Z10PE-D16-WS because it uses all the same config like mine except the number of RAM slots (cheapset and others stuff).
Unfortunately it stucks at this point when i add "nv_disable=1" boot arg to Clover:
True Dec 8 22:53:23 2020 Mac-Pro.local com.apple.xpc.launchd[1] (com.apple.WindowsServer) <Notice>: Service Only ran for 0 secobds. Pushing respawn out by 10 secondes.
I tried without changing anything and it stuck at this point:
My Config is
Mobo: Asus Z10PE-D8-WS (C612 cheapset)
CPU: Intel Xeon E5-2630 v4 2.20 Ghz (10 cores; 20 threads)
Ram: 64GB
SSD: Crucial 1To
HDD: 4x 2To
GPU: GTX 1080 8GB
PSU: Corsair 1500W
I searched on Google but found nothing. I really need your help to fix this issue!
NB: EFI i used attached and another pictures to help you helping me perhaps...