Help!!!Entering GraphicsEnabler=No everytime to boot

[amothershed10]

I just built my first Hackintosh with items listed below but everytime I boot up I have to enter graphicsenabler=no. I havint tested my HDMI only my VGA. I used unibeast, multibeast and a copy of lion 10.7 from the apple app store. How can I fix this issue and use the full graphics I am capable of? Thanks to anybody with there input.

1TB seagate Hard drive
Intel Core i3-2105 Sandy Bridge 3.1GHz LGA 1155
PNY 8GB (8-GB) (2x 4GB) PC3-10666 1333 MHz DDR3
GIGABYTE Z68MA-D2H-B3 INTEL LGA 1155 Z68 MICRO ATX MOTHERBOARD

 

[ijhu]

Read the following post referencing: GraphicsEnabler and HDMI
viewtopic.php?f=168&t=52373

GraphicsEnabler=No can be added to boot.plist if you do not want to type in manually each time.

 

[amothershed10]

How do I add it to boot.plist ? If I start using HDMI do I have to switch it to graphicsenabler=yes? I am new at this so I apologize for the step by steps. Thank you very much

 

[ijhu]

in folder Extra/org.chameleon.boot.plist add the following string.
<key>GraphicsEnabler</key>
<string>No</string>

when you switch to HDMI , change GraphicsEnabler=Yes

 

[burnext]

I don't have Extra folder and don't have any org.chameleon.boot.plist
I readed some tutorial but i can't find those things

 

[SvalinnAsgard]

You need to run MultiBeast, choose your appropriate options, and install a bootloader (Chameleon or Chimera) for those to appear.

The Extra folder can be found in the startup drive of your OSX install (at least that is where mine is).

 

[veng58]

if you are using the hd3000 as the video ,hdmi only and macmini5.1 definition in multi beast

 

[burnext]

I checked only "EasyBeast Install" and now it seem to work....

 

[burnext]

Anyway now my lan won't work...