[Help] Can't get my DW1560 Bluetooth to work (read more)

[cowcowpod]

SOLVED: A combination of: A. ensuring that the antennas are correct (or going into range), and B. USB INJECTION VIA SSDT. I simply put had too many USB ports
To be precise, bluetooth is detected, and powers on. However, it cannot see other (or discover) any other Bluetooth devices.
I can connect to my build from my iPad, but not the other way around.

To fix this, I've tried:
With/without USBInjectAll, Mux, with no result.
Applied the EHC->EC0 patches.
BrcmPatchRAM, Clover BT4LE patch

Specs:
DW 1560, BCM94352
Bluetooth 4.0, 802.11AC WIfi
Computer: ASUS ux360cak, i5-7y54

I've spent hours scouring guides and faqs, to no avail, so any help is much appreciated.

 

[RehabMan]

To be precise, bluetooth is detected, and powers on. However, it cannot see other (or discover) any other Bluetooth devices.
I can connect to my build from my iPad, but not the other way around.

To fix this, I've tried:
With/without USBInjectAll, Mux, with no result.
Applied the EHC->EC0 patches.
BrcmPatchRAM, Clover BT4LE patch

Specs:
DW 1560, BCM94352
Bluetooth 4.0, 802.11AC WIfi
Computer: ASUS ux360cak, i5-7y54

I've spent hours scouring guides and faqs, to no avail, so any help is much appreciated.

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[cowcowpod]

Sorry! (and thanks!) I've attached the output below.
I've also attempted the raise port limit patch (200 series? 10.12), with no result (I still have ~18 total ports in IOReg)

 

[cowcowpod]

I've used the SSDT USB injection, and now it works! Not sure why, but I can see (and connect) to my other computer. However some devices (notably my bluetooth speaker) doesn't show up, but I've had this issue with multiple other devices, so I assume that's the software developer's fault.
Thanks! And please mark this as solved (not sure how to).

 

[RehabMan]

Sorry! (and thanks!) I've attached the output below.
I've also attempted the raise port limit patch (200 series? 10.12), with no result (I still have ~18 total ports in IOReg)

Your USB configuration is wrong.
Read guide:
https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/

SSDT-PluginType1.aml should be removed. It conflicts with config.plist/ACPI/SSDT/Generate/PluginType=true

Your kextcache output proves kexts are not installed correctly.
All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[cowcowpod]

Ups, bad timing of my previous post. I've removed unnecessary ports using the guide (now have 9 total), and everything working as it should. Thanks!
On another note, is there any advantage (or disadvantage) of using SSDT-PluginType1.aml over the config.plist flag?

 

[RehabMan]

On another note, is there any advantage (or disadvantage) of using SSDT-PluginType1.aml over the config.plist flag?

They do exactly the same thing, so it is really personal preference.