[Help] AppleALC Kernel Panic after Catalina update

[kjc]

use -v on boot and take picture of the screen

After some tweaking around I was able to get something on the screen using -v. I still can't login without the USB however this is what I got.

 

[freituk]

You tried my config.plist but with that option checked ?

 

[freituk]

remove all kext's on Clover folder but FakeSMC, Lilu and WhateverGreen
Remove any ssdt on Clover->ACP->Patched
Look at Your Library->Extensions for no vanilla Kext and remove it too (Like usbinjectall or Ethernet card Kext)

 

[kjc]

remove all kext's on Clover folder but FakeSMC, Lilu and WhateverGreen
Remove any ssdt on Clover->ACP->Patched
Look at Your Library->Extensions for no vanilla Kext and remove it too (Like usbinjectall or Ethernet card Kext)

Yes, this was using your file. I will go ahead and do the above.

Also, to give you additional info...yesterday when I boot from the main drive it will go to a blank screen using (Clover 5100). And I was unable to print any text using -v

This morning I downgrade to Clover 4934
I was able to see the Apple logo load to the very and go to a blank blank
I was also able to see some text print using -v

 

[kjc]

remove all kext's on Clover folder but FakeSMC, Lilu and WhateverGreen
Remove any ssdt on Clover->ACP->Patched
Look at Your Library->Extensions for no vanilla Kext and remove it too (Like usbinjectall or Ethernet card Kext)

I did the above step. Still the same issue.

 

[freituk]

Sorry I m out of ideas.
Check your bios, maybe the problem is there. Serial port disabled ?
Changed SIP (CsrActiveConfig) from 0x67 to 0x3 in config.plist.
Remove your eGPU and boot with iGPU

 

[macs_forever]

Remove the AppleALC kext and use a USB based mac compatible audio DAC. This one is cheap and has a gain control --
https://www.amazon.com/gp/product/B072BMG9TB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

[kjc]

Sorry I m out of ideas.
Check your bios, maybe the problem is there. Serial port disabled ?
Changed SIP (CsrActiveConfig) from 0x67 to 0x3 in config.plist.
Remove your eGPU and boot with iGPU

I was able to get it up and running. Thank you so much for your help.

Quick question if you don't mind. How do I get back IGPU and AMD GPU to work together?

I was able to have IGPU and AMD GPU enable in Mojave at the same. I have the IGPI enable on the BIOS.

 

[hairyconipiton]

I am having a similar problem where my mac freezes after 5 minutes of inactivity. I am using three monitors all hooked up via a DP to HDMI cable. I tried deleting AppleALC.kext and SmallTreeIntel82576.kext. On another thread they said to run a terminal command to get the log files. I am attaching it here. Hoping someone can point me in the right direction.

 

[kjc]

Tested it with Catalina 10.15.2 , Clover v5100 , Lilu 1.4.0 and AppleALC 1.4.4
Still getting reboots after sleep

I have gotten my system to work. I have Catalina 15.2 and Clover 5100. I have no sleep issues. Attached is my EFI.