- Joined
- Dec 12, 2013
- Messages
- 51
- Motherboard
- GIGABYTE GA-Z87X-OC LGA 1150
- CPU
- i7 4770K
- Graphics
- GeForce GTX 760 2048MB
- Mobile Phone
I made an OpenCore 0.8.9 installer with ProperTree for Big Sur, started it up from USB and while it is going through the install, I get a circle with a line through it supposedly meaning my hardware is not supported. I am unsure if that is true, or if I have something set wrong in the .plist, etc. Attached is the EFI I am using (sans UID/serial -erial is from an old mac laptop if that makes a difference). Any help would be appreciated. Thank you
GIGABYTE GA-Z87X-OC LGA 1150 Intel Z87 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
Intel Core i7-4770K Haswell Quad-Core 3.5 GHz LGA 1150 84W BX80646I74770K Desktop Processor Intel HD Graphics
GPU - Gigabyte GTX 760 GDDR5-2GB
HP NC360T ethernet card Intel 82571EB chipset (motherboard Ethernet died)
Broadcom BCM94360CD 802.11ac WiFi WLAN Bluetooth 4.0 Card (should be supported by apple since it's an apple card)
LG Electronics 14x SATA Blu-ray Internal Rewriter (WH14NS40)
32GB RAM
GIGABYTE GA-Z87X-OC LGA 1150 Intel Z87 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
Intel Core i7-4770K Haswell Quad-Core 3.5 GHz LGA 1150 84W BX80646I74770K Desktop Processor Intel HD Graphics
GPU - Gigabyte GTX 760 GDDR5-2GB
HP NC360T ethernet card Intel 82571EB chipset (motherboard Ethernet died)
Broadcom BCM94360CD 802.11ac WiFi WLAN Bluetooth 4.0 Card (should be supported by apple since it's an apple card)
LG Electronics 14x SATA Blu-ray Internal Rewriter (WH14NS40)
32GB RAM
Attachments
Last edited: