Hard Drive Not Visible to Installer

[359]

Hello, I'm working on installing OS X El Capitan onto my new machine. But when I go the Disk Utility to format my destination drive none of the internal drives appear, only the USB install stick. In BIOS both the 128 GB SM951 and the 1 TB WD appear and are working. Any ideas on why this is?

System specs:
i7-6700k
MSI Z170-a Pro
G.Skill Ripjaws V DDR4-3000 8GB x2
SM951 128GB
WD 1TB
EVGA GTX 960 SSC ACX2.0


[SOLUTION]
Changed BIOS setting:

Settings\Advanced\Integrated Peripherals

SATA Mode: [RAID Mode]->[AHCI Mode]

 

[359]

I used an Ubuntu installer and can see the disks from there, so I'm guessing that clover is not getting the information. Any possible fixes or information on this?

 

[KONKY1]

Sometimes it could be down to the BIOS not registering could due to a hard drive failure, incorrect partitioning or simply not being connected entirely.

Try reseting the BIOS and correctly setting up each section then return with any results.

I should say EXPERIMENT WITH CAUTION, do everything logically testing wether to not it works.

 

[359]

[SOLUTION]

Changed BIOS setting:

Settings\Advanced\Integrated Peripherals

SATA Mode: [RAID Mode]->[AHCI Mode]