Hang on boot at white apple screen without -x command

[shocker828]

I am not able to get my system to boot up. I have to use the -x command to get to the unibeast created installer. I installed and everything happened as usual. Restarting and booting up with the unibeast drive causes the system to hang at the white apple screen. The gear keeps on turning forever. if I bootup and use -x again I am able to get into the os and set everything up as usually. What should I do to make it boot properly. I have not been able to find anyone having this problem. Very new to this. I am attached an image of my boot using the -v command.

gigabyte z77-ds3h
intel i7 3770
only using on board graphics for now
Kingston HyperX 4X4gb memory

WD Black (WD1002FAEX) 1000GB (1TB) SATA3 7200RPM 64MB Cache (OEM)
intel 520 series 120gb 2.5" Sata3​

 

[jenc]

I'm having the same issue as shocker and I have the exact same Mobo and CPU.
I downloaded the latest Multibeast with no luck.
It boots fine with -x.
And -v does not reveal any error messages.

Any help is appreciated.

 

[TheMrAleg22]

Could it be that you haven't installed the latest power management via multibeast? then if it still doesnt work you might need to use the graphics enabler=no, they r the most common problems

 

[StoplightLooseJaw]

I am having the same problem with my UD5H MB (i7 3770k). boots into ML with -x (safe mode) but hangs up on Apple Logo when trying to boot otherwise