- Joined
- Jul 4, 2019
- Messages
- 2
- Motherboard
- z270x
- CPU
- i7 7700K
- Graphics
- GTX 1060 OC 6GB
haintakajose's Coffee Lake Build:
Intel Core i5-9400f - Asus H310M Plus - 16GB DDR4 2666 RAM - XFX RX570 8GB
Components
Intel Core i5-9400F Desktop Processor 6 Cores 4.1 GHz Turbo Without Graphics
https://www.amazon.com/dp/B07MRCGQQ4/?tag=tonymacx86com-20
ASUS TUF H310M-Plus Gaming LGA1151 (300 Series) DDR4 HDMI VGA M.2 mATX Motherboard (TUF H310M-PLUS Gaming)
https://www.amazon.com/dp/B07BP9B3LS/?tag=tonymacx86com-20
XFX Radeon RX 570 RS XXX Edition 1286MHz, 8gb GDDR5, DX12 VR Ready, Dual BIOS, 3xDP HDMI DVI, AMD Graphics Card (RX-570P8DFD6)
https://www.amazon.com/dp/B077VX31FZ/?tag=tonymacx86com-20
HP SSD S700 2.5" 250GB SATA III 3D NAND Internal Solid State Drive (SSD) 2DP98AA#ABC
https://www.amazon.com/dp/B071FCJLHC/?tag=tonymacx86com-20
Corsair CX Series 450 Watt 80 Plus Bronze Certified Non-Modular Power Supply (CP-9020120-NA)
https://www.amazon.com/dp/B01MTZ96RU/?tag=tonymacx86com-20
2 x Kingston HyperX FURY 8GB 1866MHz DDR3 CL10 DIMM - Black (HX318C10FB/8)
https://www.amazon.com/dp/B00J8E92I0/?tag=tonymacx86com-20
Already Owned
Dell Ultrasharp U2718Q 27-Inch 4K IPS Monitor
https://www.amazon.com/dp/B073VYVX5S/?tag=tonymacx86com-20
Comments
I know that XFX cards are not supposed to be compatible, but with Lilu and WhatEverGreen this seems to be working just fine! I got no glitches or random KPs and full hardware acceleration while using a 4K display. (didn't tested video editing apps tough)
UEFI Settings
1. Loaded default values
2. Disabled Serial Ports
3. Disabled secure boot - Erased secure boot keys
4. Enabled XHCI hand off
Installation Notes
While trying to install after creating the bootable pen drive with UniBeast I got stuck at "2 minutes remaining" freezing, and manually rebooting to continue installation got me a black screen after 10 seconds at "13 minutes remaining".
Looking at the logs during installation nothing grabbed my attention, and the last lines said something like "the drive couldn't be migrated to APFS".
But nonetheless I got this fixed by changing the installed EFI drivers, more specifically installing EmuVariableUefi.
Update: I got slow SSDs read/writes after first boot. I got it fixed by enabling TRIM Patch Fix on Clover Configurator.
Process to create the bootable pen drive
- Created a Bootable Pendrive using Unibeast (UEFI)
- Using Clover Configurator installed the following drivers:
- ApfsDriverLoader
- EmuVariableUefi
- FSInject
- HFSPlus
- OxsAptioFix3Drv
- VirtualSmc
- Also using Clover Configurator also installed the following kexts:
- AppleALC
- IntelMausi
- Lilu
- USBInjectAll
- VirtualSMC
- WhateverGreen
- Booted using UEFI
- Installation got smooth from beginning to end
- Inside macOS installed Clover 5103 though Clover Configurator
- Installed the previous Kexts on macOS /Library/Extensions
- Reboot and it's done. Running Perfectly.
Bluetooth Dongle:
Update 2: I performed a clean install again and copied USB EFI over newly installed macOS EFI. Now CSR 4.0 is working out of the box, just plugin it.
Benchmarks
Attachments
Last edited: