[Guide] Intel Skylake NUC6 (and Skull Canyon) using Clover UEFI (NUC6i5SYK, NUC6i7KYK, etc)

[RehabMan]

Is there a guide on how to extract the installer? I searched but could not find anything applicable.

Thanks.

It is described in the main Clover laptop guide (which is linked from this guide post #1):

You can find apfs.efi at /usr/standalone/i386/apfs.efi inside of "/Applications/Install macOS High Sierra.app/Contents/SharedSupport/BaseSystem.dmg".

 

[den_breacker]

Hi,

After updating to 10.13.1 I ran into some issues.
Can't boot anymore. For a very short time I see some output concerning afps.efi
Currently I boot via my installer usb.

Audio is broken (already tried the steps in post 1 to fix)
Bluetooth is acting weird, often can't connect my keyboard and mouse.

Please find attached the problem reporting files.

Thanks in advance!

 

[RehabMan]

Hi,

After updating to 10.13.1 I ran into some issues.
Can't boot anymore. For a very short time I see some output concerning afps.efi
Currently I boot via my installer usb.

Audio is broken (already tried the steps in post 1 to fix)
Bluetooth is acting weird, often can't connect my keyboard and mouse.

Please find attached the problem reporting files.

Thanks in advance!

Audio not expected to work when booting from USB.
Support for Intel BT is poor.
Must boot from SSD EFI for audio (and a lot of other things).
No verbose boot photo attached.
Your config.plist is not up-to-date.

 

[den_breacker]

Audio not expected to work when booting from USB.
Support for Intel BT is poor.
Must boot from SSD EFI for audio (and a lot of other things).
No verbose boot photo attached.
Your config.plist is not up-to-date.

See attached photo. This is what i get to see before entering Clover.
After I select "boot from macOS HD" in Clover, the pc immediately reboots, without verbose logs.

 

[RehabMan]

See attached photo. This is what i get to see before entering Clover.

Normal.

After I select "boot from macOS HD" in Clover, the pc immediately reboots, without verbose logs.

Did you fix your config.plist? Read post #1, "Final config.plist".

 

[den_breacker]

Did you fix your config.plist? Read post #1, "Final config.plist".[/QUOTE]
yes, see attachment for updated config.plist

Still can't boot.
Reinstalled clover to efi with your latest version, but still no success.

 

[RehabMan]

yes, see attachment for updated config.plist

Still can't boot.
Reinstalled clover to efi with your latest version, but still no success.

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Also, you must describe exactly at what stage of the installation process you are in.

 

[den_breacker]

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Also, you must describe exactly at what stage of the installation process you are in.

I have attached all problem reporting files in post #112.
I had a fully working High Sierra setup. I updated from 10.13.0 to 10.13.1, following the guidelines in the first post.
Since the update, I can't boot anymore. After selecting my bootvolume in Clover, my NUC immediately reboots. there is no verbose output. So at the moment, as a temporary solution, I use the installer usb to boot.

 

[RehabMan]

I have attached all problem reporting files in post #112.

Any change requires all new problem reporting files.

 

[Juandelarocha]

Hello.

I'm planning to make a mod using my old iMac G4 employing the Intel NUC 6I3SYK. Can you please verify that graphics in this NUC are supported as well? (Intel HD Graphics 520). I ask this 'cause everytime I read the list of boards supported are refered to i5 models.

Thanks!