Contribute
Register

[Guide] Install High Sierra on the HP 6300 Pro / 8300 Elite Desktop PC

trs96

Moderator
Joined
Jul 31, 2012
Messages
11,830
Motherboard
GA-Z97X-UD3H-BK
CPU
I5-4690K
Graphics
HD4600 / RX 570
Mac
iMac, Mac mini
Mobile Phone
Android
Ok,back output sound, not work.
Play Sound in case.
Front sound output worked
You have it plugged into the input jack and not the output. Try the green one right below that.

IMG_20190106_000436_HHT.jpg
 
Last edited:

trs96

Moderator
Joined
Jul 31, 2012
Messages
11,830
Motherboard
GA-Z97X-UD3H-BK
CPU
I5-4690K
Graphics
HD4600 / RX 570
Mac
iMac, Mac mini
Mobile Phone
Android
How to Activate ALC221 Audio and your Front Microphone Jack
In post #2 of this thread, I posted a guide to patch your DSDT for working ALC221 audio. That patch doesn't enable the front combo Mic/Headphone jack. If you absolutely need that Mic input to work, you can now use an SSDT and the Codec Commander kext + a minor config.plist edit to get a working Mic jack . If you don't use that front mic jack, simply continue to use your previously patched DSDT for working ALC221 audio. Credit for the ALC221 SSDT.aml goes to: Sniki

0. Remove the VoodooHDA and AppleHDA Disabler kexts if you had installed those previously.

  1. Remove your patched DSDT from Clover/ACPI/patched and put it in a folder to keep as a backup option.
  2. Back up your current working Clover config.plist. You could put it in the same folder as your patched DSDT.
(this is done in case your edits don't work or the new config.plist gets corrupted some how.)

3. Open your system drive's Clover config.plist with a plist editor and make the following change of the Audio Layout ID from 11 to 0. (The DSDT patching guide suggested the change to 11. Yours may already be set to 0)

377940


4. Edit your system drive's Clover config.plist with the following entry in the Devices section. It should be entered just after the Inject Audio Layout ID section shown above. (Use a plist editor like PlistEdit Pro or BBedit to make the edit. Do not use the Mac text edit app)

Code:
<key>Properties</key>
<dict>
      <key>PciRoot(0)/Pci(0x1b,0)</key>
      <dict>
          <key>#Comment</key>
          <string>Realtek ALC221 Audio Configuration</string>
          <key>hda-gfx</key>
          <string>onboard-1</string>
          <key>layout-id</key>
          <integer>11</integer>
      </dict>
</dict>
Here's how it should look when you've finished the edit:
377890


This screenshot is from the Devices/Properties section in Clover Configurator

387389


  1. Download the two attached files, RehabMan-Codec Commander kext and the SSDT for ALC221
  2. Install Codec Commander to /L/E/ with Kextbeast
  3. Drag and drop the SSDT-ALC221.aml into your Clover/ACPI/patched folder
  4. Make sure you've got the latest versions of Lilu and AppleALC kexts installed to /L/E
  5. Reboot and test out your front combo mic/headphone jack
 

Attachments

Last edited:
Joined
Dec 17, 2018
Messages
5
CPU
i5-3570
Graphics
MSI Nvidia GTX 1050Ti LP
Mac
MacBook Air
Mobile Phone
iOS
How to Activate your HP's Front Microphone Jack
In post #2 of this thread, I posted a guide to patch your DSDT for working ALC221 audio. That patch doesn't enable the front combo Mic/Headphone jack. If you absolutely need that Mic input to work, you can now use an SSDT and the Codec Commander kext + a minor config.plist edit to get a working Mic jack . If you don't use that front mic jack, simply continue to use your previously patched DSDT for working ALC221 audio. Credit for this method goes to: Sniki

1. Remove your patched DSDT from Clover/ACPI/patched and put it in a folder to keep as a backup option.
2. Back up your current working Clover config.plist. You could put it in the same folder as your patched DSDT.
(this is done in case your edits don't work or the new config.plist gets corrupted some how.)

3. Edit your system drive's Clover config.plist with the following entry in the Devices -> Properties section of that.
(Use a plist editor like PlistEdit Pro or BBedit to make the edit. Do not use the Mac text edit app)
Code:
<key>PciRoot(0)/Pci(0x1b,0)</key>
<dict>
     <key>#Comment</key>
     <string>Realtek ALC221 Audio Configuration</string>
     <key>hda-gfx</key>
     <string>onboard-1</string>
     <key>layout-id</key>
     <integer>11</integer>
</dict>
This screenshot is from the Devices section in Clover Configurator
View attachment 377324
While in Clover Configurator, change Devices -> Audio -> Inject change this value back to 0 if you had previously changed it to 11 after you patched your DSDT for ALC221

View attachment 377397

4. Download the two attached files, RehabMan-Codec Commander kext and the SSDT for ALC221
5. Install Codec Commander to /L/E with Kextbeast
6. Drag and drop the SSDT-ALC221.aml into your Clover/ACPI/patched folder
7. Reboot and test out your front combo mic/headphone jack
I need a bit of help with #3. I opened the config.plist file with PlistEdit Pro and found the devices section, but the properties section is no where to be seen. Is there any way you can share some photos so I can understand the process a bit easier? (I'm still a bit of a noob at this sorry) Also for the codec commander file there are 2 codec kexts, one in a 'release' folder and the other in a 'debug' folder. Do I use the kext from the release?
 

trs96

Moderator
Joined
Jul 31, 2012
Messages
11,830
Motherboard
GA-Z97X-UD3H-BK
CPU
I5-4690K
Graphics
HD4600 / RX 570
Mac
iMac, Mac mini
Mobile Phone
Android
I need a bit of help with #3. I opened the config.plist file with PlistEdit Pro and found the devices section, but the properties section is no where to be seen. Is there any way you can share some photos so I can understand the process a bit easier? (I'm still a bit of a noob at this sorry) Also for the codec commander file there are 2 codec kexts, one in a 'release' folder and the other in a 'debug' folder. Do I use the kext from the release?
Upload a copy of your current config.plist. For the codec commander kext you want to use the release version.
 

trs96

Moderator
Joined
Jul 31, 2012
Messages
11,830
Motherboard
GA-Z97X-UD3H-BK
CPU
I5-4690K
Graphics
HD4600 / RX 570
Mac
iMac, Mac mini
Mobile Phone
Android
Here you go.
OK I changed post #443 to show the Properties key too. See screen grab for where to enter it in your config.plist.

Screen_Shot_1.jpg
 
Joined
Dec 6, 2017
Messages
20
Motherboard
HP Compaq 6300 657239-001
CPU
i5-3570
Graphics
RX 560
Mac
iMac, MacBook Pro
Mobile Phone
iOS
Try installing the latest Whatevergreen kext to /L/E as well as Lilu if you don't have that. Use kextbeast to install the kexts then run Kext Utility to rebuild caches and repair permissions.

thank you very much, but it doesn't work for me.. :( i have thedame 2 problems, can't shutdown if the wifi usb receiver, and the second monitor doesn't work, if i plug the second, the system doen't start, after the apple screen at 40% the 2 screens remain black. :(

i Downloaded whatevergreen and lilu from the downloads section, then put them on the desktop . download kextbeast and install, i can't choose /library extensions and system L/E at the sale time, i only can check one of them.
then i reboot and use kext utility. I try again rebooting after kext utility..
 

trs96

Moderator
Joined
Jul 31, 2012
Messages
11,830
Motherboard
GA-Z97X-UD3H-BK
CPU
I5-4690K
Graphics
HD4600 / RX 570
Mac
iMac, Mac mini
Mobile Phone
Android
i can't choose /library extensions and system L/E at the sale time, i only can check one of them.
Are you selecting install to /L/E or /S/L/E at this stage ? It should only be /L/E
 
Top