[Guide] HP ProBook 430 G3 (SkyLake) - High Sierra

[RehabMan]

Updated from your github, still black screen after closing lid and reopening.

Confirmed 0x191b0000 is being loaded and in config plist.

Your ioreg proves you're not using current github files.

I think i may be using the wrong commands for the hotpatch to latest github for *probook 6x0....

git clone https://github.com/RehabMan/HP-ProBook-4x30s-DSDT-Patch probook.git
cd ~/Projects/probook.git
./download.sh
./install_downloads.sh

./install_acpi.sh install_6x0g2_skylake



this is wrong isnt it.......... :/

Procedures for updates to the github repo is covered in post #1.

 

[kjohns68]

Your ioreg proves you're not using current github files.



Procedures for updates to the github repo is covered in post #1.

ok.. all fixed correctly, I hope. Also wake from sleep also fixed
only glitch I have now is my keyboard backlight no longer works....

 

[RehabMan]

ok.. all fixed correctly, I hope. Also wake from sleep also fixed
only glitch I have now is my keyboard backlight no longer works....

You will need to provide details on the key backlight problem.
No other reports, and "no longer works" is not enough information.

 

[kjohns68]

You will need to provide details on the key backlight problem.
No other reports, and "no longer works" is not enough information.

I correctly installed from github . (see post 211) . Keyboard backlight worked prior to updating to correct github files fr my model laptop. Now it does not turn on at all.

 

[RehabMan]

I correctly installed from github . (see post 211) . Keyboard backlight worked prior to updating to correct github files fr my model laptop. Now it does not turn on at all.

Did you do EC reset?
Does it work if you boot from USB?
Is your BIOS current?

 

[kjohns68]

Did you do EC reset?
Does it work if you boot from USB?
Is your BIOS current?

I cannot remove battery from My model laptop.. But I killed the battery... (close as I cant get without dismantling the laptop)
No it does not work from USB
Yes Bios is current . (v1.17)

I reverted to my prior Incorrect system files.. it works.. Install proper file for 6x0 (640 Probook) . They no longer light up.

 

[kjohns68]

Ok... wow...... It was just turned off.... I feel like an idiot... lol
Was looking at all the configuration, it showed it was loaded and working.. but display value was set to zero.....

 

[RehabMan]

I cannot remove battery from My model laptop.. But I killed the battery... (close as I cant get without dismantling the laptop)
No it does not work from USB
Yes Bios is current . (v1.17)

I reverted to my prior Incorrect system files.. it works.. Install proper file for 6x0 (640 Probook) . They no longer light up.

Ok... wow...... It was just turned off.... I feel like an idiot... lol

I assume you disabled it in BIOS or something...

 

[kjohns68]

I assume you disabled it in BIOS or something...

Ok... wow...... It was just turned off.... I feel like an idiot... lol
Was looking at all the configuration, it showed it was loaded and working.. but display value was set to zero..... one quick keystoke... voila.... wow . :/

 

[antonio765]

Have you updated your version of Clover? Are you using Rehabmans Fork or the Regular Clover?

I was quite long ago, about year ago or even earlier. So I don't remember exactly. I guess I used a mixture. First I installed vanilla Clover, then I used Rehabman's ACPI mappings, and config is taken from UniBeast. But once again: this information is not 100% reliable. You can find my final report archive in this thread.