Guide: GA-P67A-UD3-B3 with ATI 5870 – 10.6.8 and Lion

[swanhunter]

Well, I solved the problem installation with GraphicsEnabler=No.
Now Lion works, but I dont' have graphics acceleration for my Sapphire 5770. I've searched throw forum but can't find any solution.
Has anybody a 5770 fully working?

Bye,

 

[zaborgttm]

Anyone having problems manually setting turbo states with the F5 bios? I can set the first 3 to 45-44-43 (tried many others too, even defaults) but the last one stays on Auto no matter what, and every time it resets the other values. I've re flashed the bios a couple of times but the problem persists. Am I alone on this?

I'm having the same issue but it has been like that since I got the board.

 

[muddybulldog]

Anyone having problems manually setting turbo states with the F5 bios? I can set the first 3 to 45-44-43 (tried many others too, even defaults) but the last one stays on Auto no matter what, and every time it resets the other values. I've re flashed the bios a couple of times but the problem persists. Am I alone on this?

I see the same. Under F4 I saw similar whereas setting a value that it didn't "like" for whatever reason also reset the first 3.

 

[silviaf]

Can't believe my first post here isn't a big THANK YOU :/

I just can't get the 10.6 Retail DVD to boot into the Installer. (MBP 10.6.7 DVD boots up fine)

Corei5-2500k
GA-P67A-UD3-B3 Rev.1.1 (updated to F4 Bios, optimized "configuration", AHCI on, HPET 64bit, ACPI S3)
1x4GB DDR3 Stick
Sapphire 4870 512MB (near CPU-PciE Slot, 1 Monitor) i guess? that's the reason
Vertex2 60GB (blue SATA2 port (nr. 3)
LiteOn DVD (blue SATA2 port (nr. 2)
USB mouse + keyboard.
Retail 10.6 DVD (from MacStore)
MBP 10.6.7 DVD (shipped with)

tried iboot + iboot Legacy

iboot + 10.6 DVD: -v output





after last picture, nothing happens (turned off after 5 min (no DVD noises anymore))

any idea what could be the cause?

I'm going to triple check the Bios settings again....

thanks in advance

 

[Gordo74]

Can't believe my first post here isn't a big THANK YOU :/

I just can't get the 10.6 Retail DVD to boot into the Installer. (MBP 10.6.7 DVD boots up fine)

Corei5-2500k
GA-P67A-UD3-B3 Rev.1.1 (updated to F4 Bios, optimized "configuration", AHCI on, HPET 64bit, ACPI S3)
1x4GB DDR3 Stick
Sapphire 4870 512MB (near CPU-PciE Slot, 1 Monitor) i guess? that's the reason
Vertex2 60GB (blue SATA2 port (nr. 3)
LiteOn DVD (blue SATA2 port (nr. 2)
USB mouse + keyboard.
Retail 10.6 DVD (from MacStore)
MBP 10.6.7 DVD (shipped with)

tried iboot + iboot Legacy

iboot + 10.6 DVD: -v output





after last picture, nothing happens (turned off after 5 min (no DVD noises anymore))

any idea what could be the cause?

I'm going to triple check the Bios settings again....

thanks in advance

Boot with GraphicsEnabler=No until you install multibeast with the 48xx patch under graphics.

 

[nandio]

Hello

This is my system:

MOBO : Gigabyte GA-P67A-UD3-B3 rev 1.1
CPU: Core i7 2600K
Memory: 4 GB Kingston Single Channel
Video: XFX 5670 1 GB.
HD: 1 TB HITACHI

I follow the entire guide but, on restart after MB, the system hang in apple screen with circle.

Any idea? , please help me.

 

[zaborgttm]

Hello

This is my system:

MOBO : Gigabyte GA-P67A-UD3-B3 rev 1.1
CPU: Core i7 2600K
Memory: 4 GB Kingston Single Channel
Video: XFX 5670 1 GB.
HD: 1 TB HITACHI

I follow the entire guide but, on restart after MB, the system hang in apple screen with circle.

Any idea? , please help me.

boot with -v and post any errors please.

 

[MacBeginner]

Cannot boot into the installation

Hi,

after selecting my USB Drive(SL 10.6.3 Retail) with iBoot I get an error, but I don´t know the reason.
SYSTEM:
i5 2500K
P67A-UD3-B3 F5 1.1
12GB DDR3 RAM
Radeon HD4890

I´ve removed 8GB of RAM.
Only connected mouse and keyboard and one HDD.

Any idea what could be the problem?

Regards

 

[Gordo74]

The 48xx series has significant problems with OSX. Especially the 4890 and 4850. Buy a new card.

 

[MacBeginner]

I've Used the hd4890 since yesterday on my old hackintosh and it worked Great under 10.6.8 with qe/ci .

I think the Error isnt related to my Video Card. Maybe because i use a USB Stick?