Contribute
Register

[Guide] Dell XPS 13 9360 on MacOS Sierra 10.12.x - LTS (Long-Term Support) Guide

Status
Not open for further replies.
Hi all,
I have gone through the guide and used the clover files from the first post. Under system preferences there is no audio device shown, but it is listed under about this mac.
Intel High Definition Audio:
Audio ID: 13

Am I missing something. Have the post install kexts not been installed properly?

My Current config:
Dell XPS 9360 Clover 42XX,
i5-7200U
Intel HD Graphics 620, 1920x1080
 

Attachments

  • CLOVER.zip
    7.4 MB · Views: 88
Laptop: Dell XPS 9360(most recent Clover r4XXX)
CPU: i5-7200U
Graphics: HD620, 1920x180
SSD： Samsung 960 EVO


Just upgraded to 10.12.6.
Followed the guide and copied Clover file from the first post, added SSDT-NVMe-Pcc.aml and HackrNVMEFamily 10_12_6.kext by following the post step by step.
However, the boot stuck at AppleACPICPU timeout and AppleIntelLpssICController time out.

Anyone knows why?
 

Attachments

  • IMG_3937.jpg
    IMG_3937.jpg
    2.8 MB · Views: 101
  • CLOVER.zip
    3.7 MB · Views: 92
Dlingo said:
Hi all,
I have gone through the guide and used the clover files from the first post. Under system preferences there is no audio device shown, but it is listed under about this mac.
Intel High Definition Audio:
Audio ID: 13

Am I missing something. Have the post install kexts not been installed properly?

My Current config:
Dell XPS 9360 Clover 42XX,
i5-7200U
Intel HD Graphics 620, 1920x1080
Click to expand...

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 
francke said:
Laptop: Dell XPS 9360(most recent Clover r4XXX)
CPU: i5-7200U
Graphics: HD620, 1920x180
SSD： Samsung 960 EVO


Just upgraded to 10.12.6.
Followed the guide and copied Clover file from the first post, added SSDT-NVMe-Pcc.aml and HackrNVMEFamily 10_12_6.kext by following the post step by step.
However, the boot stuck at AppleACPICPU timeout and AppleIntelLpssICController time out.

Anyone knows why?
Click to expand...

Try with USB prepared according to the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
 
RehabMan said:
Try with USB prepared according to the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
Click to expand...
Thanks for the reply.
I have bootable usb with dsdt patch from 10.12.3 and that works with 10.12.6. I can basically copy the clover from usb to local ELI drive and everything will work.
What I am trying to do here is to get the extra battery life with the hotpatch that described in the first post for the 10.12.6.
I think the problem occurred because of the My samsung 960 EVO maybe?? Since I have the same laptop here.
Please help me with this.
Thank you so much.
 
francke said:
Thanks for the reply.
I have bootable usb with dsdt patch from 10.12.3 and that works with 10.12.6. I can basically copy the clover from usb to local ELI drive and everything will work.
What I am trying to do here is to get the extra battery life with the hotpatch that described in the first post for the 10.12.6.
I think the problem occurred because of the My samsung 960 EVO maybe?? Since I have the same laptop here.
Please help me with this.
Thank you so much.
Click to expand...

Read post #1464. Try it. If you can boot your system, then you can provide "Problem Reporting" files as per FAQ.
 

Attachments

  • io.zip
    468.2 KB · Views: 79
  • RehabMan.zip
    58.7 KB · Views: 74
It didn't output anything from that command
 

Attachments

  • kext.txt
    335 bytes · Views: 123
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top