[Guide] Acer Aspire S3-951 using Clover

[rockyjai]

20GB is not adequate for OS X anyway.

After installing and completing updates on Windows, rename \EFI\Microsoft\Boot\bootmgfw.efi to bootmgfw-orig.efi. If a Windows update should re-create bootmgfw.efi, remove bootmgfw-orig.efi (the old file), and rename bootmgfw.efi (the new file) to bootmgfw-orig.efi.

Thanks for your passionate reply.
I cannot reach to the bootloader after changing the name of the bootmgfw.efi to bootmgfw-orig.efi.
I found this file in C\Windows\Boot\EFI\ Was I get it in the wrong way?
or should I change my BIOs to customized one? any recommendation?
v1.18 cannot even change the boot mode to UEFI. I don't know it affect the result. Thanks

 

[RehabMan]

Thanks for your passionate reply.
I cannot reach to the bootloader after changing the name of the bootmgfw.efi to bootmgfw-orig.efi.
I found this file in C\Windows\Boot\EFI\ Was I get it in the wrong way?

That is not the location of the file. I gave the location in my post. It is on the EFI partition.

 

[rockyjai]

That is not the location of the file. I gave the location in my post. It is on the EFI partition.

Excuse for disturbing you many many times
I cannot find any Window folder in EFI partition when I boot in my MacOS.
So I found the similar path in Window partition. Was I doing something wrong in flashing two OSes?

I divided the driver in Disk Unitity before installing the Yosemite. and Install Window 7 X64 in another partition. But I cannot find any Window folder in EFI partition.

Thanks.

 

[RehabMan]

Excuse for disturbing you many many times
I cannot find any Window folder in EFI partition when I boot in my MacOS.
So I found the similar path in Window partition. Was I doing something wrong in flashing two OSes?

I divided the driver in Disk Unitity before installing the Yosemite. and Install Window 7 X64 in another partition. But I cannot find any Window folder in EFI partition.

Thanks.

Perhaps Windows is not installed UEFI.

 

[Wheel1234]

Hallo Community,
allready i spend allot of Time with my Acer aspire s3-951 i7 sandy Bridge

now i dit this hackintosh with clover and I am stocking at "missing bloutooth controller " when I try to boot it with clover from My HDD .

i dit exactly the same steps like in discription .



Anyone a idea what it can be ?

 

[RehabMan]

Hallo Community,
allready i spend allot of Time with my Acer aspire s3-951 i7 sandy Bridge

now i dit this hackintosh with clover and I am stocking at "missing bloutooth controller " when I try to boot it with clover from My HDD .

i dit exactly the same steps like in discription .



Anyone a idea what it can be ?

Post EFI/Clover folder.

 

[Wheel1234]

I put as attechment with iPad i dont work so well

 

[RehabMan]

I put as attechment with iPad i dont work so well

Request was not for an image of your EFI/Clover folder in the Finder.

Request was for actual folder contents. Compress as ZIP and post as attachment.

 

[Wheel1234]

oh sorry thank you

 

[RehabMan]

oh sorry thank you

Note: Clover will not load DSDT/SSDTs from EFI/Clover/ACPI. Must be in in EFI/Clover/ACPI/patched.

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.