- Joined
- Nov 14, 2013
- Messages
- 22
- Motherboard
- GA-Z87X-UD3H
- CPU
- i5-4670K
- Graphics
- GTX770 palit jetstream 2gb
- Mac
- Mobile Phone
Hey guys
Started to install OSX on my machine yesterday, everything is working except my GPU.
My specs are as follows:
I5 4670K
Gigabyte z87x-ud3h
8GB g.skill ripjaw 1600mhz
Asus strix gtx 970
installed on a 120GB crucial SSD.
OSX El Capitan 11.5 ( most recent version from appstore created the pen drive yesterday)
Mac pro 6,1 smbios like I always ran
After creating a working unibeast usb stick and went trough the installation without any issues, I ran multibeast with my previous known good working configuration so everything except the GPU is working.
After multibeast I ran the nvidia web drivers and they are installed, updated clover bootloader and added the nvda_drv=1 boot flag.
With this bootflag my screens ( 2* Dell ultrasharp u2515H 1440p one connected via HDMI and one connected trough DP 1.2) refuse to turn on, When remove the nvda_drv=1 and add nv_disabled=1 one of the screens pops on and I can work but without any acceleration and having artifacts.
Any tips or tricks that can help in this situation?
Started to install OSX on my machine yesterday, everything is working except my GPU.
My specs are as follows:
I5 4670K
Gigabyte z87x-ud3h
8GB g.skill ripjaw 1600mhz
Asus strix gtx 970
installed on a 120GB crucial SSD.
OSX El Capitan 11.5 ( most recent version from appstore created the pen drive yesterday)
Mac pro 6,1 smbios like I always ran
After creating a working unibeast usb stick and went trough the installation without any issues, I ran multibeast with my previous known good working configuration so everything except the GPU is working.
After multibeast I ran the nvidia web drivers and they are installed, updated clover bootloader and added the nvda_drv=1 boot flag.
With this bootflag my screens ( 2* Dell ultrasharp u2515H 1440p one connected via HDMI and one connected trough DP 1.2) refuse to turn on, When remove the nvda_drv=1 and add nv_disabled=1 one of the screens pops on and I can work but without any acceleration and having artifacts.
Any tips or tricks that can help in this situation?
Last edited: