gigabyte z68xp big problem please help. can not run programs

[hotbullet]

sorry to post again.. but please help

Hello.

my hardware set up are as below.
mb: gigbyte Ga-Z68p-UD3r.
Cpu: i72600k.
Hdd. Wd 1TB, SSD patriot 128GB.
post: installation. multibeast for lion and easybeast.

Problem.
i am not able to run some programs, it shows up like this.

new findings.23/6/2012
hi i still have same problem could not figure out.
i have tried with 3 amd card. on my p67a-ud7 rev 1.0
-5770
-6870 his
-6870 sapphire

on gigabyte board it is always the same error.

i did not use dsdt since my board is not p67A-UD7 it does not have dsdt.

however on asus board seems to work fine., but my asus board is dead now.

so i install same on the other drive but this time i didn't do post installation.and boot with lion usb installation disk. i can run the program.

i can run the program..

can anyone please help.. however on p67 asus board. everything runs fine.

thanks.

Bump Anyone

 

[HoochShepherd]

What did the report tell you?

 

[hotbullet]

What did the report tell you?

Xxxx(able ton) quit unexpectedly before entering the program.
Same with geekbench

 

[hotbullet]

bump

 

[jvangorkum]

You gotta give us some more information really.

Which DSDT did you use? Make sure you downloaded the correct one that has your BIOS version. From my experience if you've installed userDSDT you don't need to install easybeast.

 

[fb5000]

What gpu are you using and are you using graphics enabler? Many have the issue of ableton live, dvd player and other applications crashing before they open due to the incorrect frame buffer being loaded with their graphics card. I'm on 10.6.8, so can only comment on my experience, but was able to fix this issue and get my gpu working at full functionality with playing around with GraphicsEnabler and AtiConfig settings... There are lots of posts about this issue in the graphics section if it turns out to be your issue as well... If your current setup is using graphicsenabler=yes, I suggest trying without graphics enabler to see if you still get the crashes... If you're able to isolate it to being gpu related, then you can troubleshoot how to get it running correctly.

Not sure how to help if it's not gpu related.

 

[hotbullet]

hi i still have same problem could not figure out.
i have tried with 3 amd card.
-5770
-6870 his
-6870 sapphire

on gigabyte board it is always the same error.

i did not use dsdt since my board is not p67A-UD7 it does not have dsdt.
however on asus board seems to work fine., but my asus board is dead now.

 

[hotbullet]

please anyone

 

[iUserosx]

check what fb5000 said......seems the problem is related to ur gpu

 

[ovb1]

on gigabyte board it is always the same error.

i did not use dsdt since my board is not p67A-UD7 it does not have dsdt.
however on asus board seems to work fine., but my asus board is dead now.

There is a DSDT for P67A-UD7-B3?

Is this not your board? I'd try it even if your not a B3 board...it might well work fine?
You can load a DSDT temp at boot so your not risking your system. You'll have to search to find out how cause I can't remember how. You give the DSDT a different name and type a prompt at boot - "use DSDT1" something like that!!