Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

[zgonda]

Hello MR casey thank you for this new tutorial!! Well, it doesn't work on my Z390 Designare (message at the launch of Heliport: "itlwm is not loaded...", maybe because (to keep the BT) I left the FENVI card installed ?

 

[CaseySJ]

Hello MR casey thank you for this new tutorial!! Well, it doesn't work on my Z390 Designare (message at the launch of Heliport: "itlwm is not loaded...", maybe because (to keep the BT) I left the FENVI card installed ?

Hello @zgonda,

Please list the steps you took to install Itlwm. Also post screenshot of OpenCore Configurator -> Kernel.

 

[zgonda]

Hello @zgonda,

Please list the steps you took to install Itlwm. Also post screenshot of OpenCore Configurator -> Kernel.

1) Install Itlwm: Kext placed in Kexts, and activation of this Kext in config.plist--->kernel

2) SIP still active

3)HeliPort (1.4.1) in applications

 

[MacArthur]

Love your French accent

 

[CaseySJ]

1) Install Itlwm: Kext placed in Kexts, and activation of this Kext in config.plist--->kernel

2) SIP still active

3)HeliPort (1.4.1) in applications
View attachment 567808

This looks correct. If you have multiple disks (EFI partitions) in the system, are you booting from the right disk?

In terminal, what is the output of this command?

kmutil showloaded | grep itlwm

 

[zgonda]

This looks correct. If you have multiple disks (EFI partitions) in the system, are you booting from the right disk?

In terminal, what is the output of this command?

kmutil showloaded | grep itlwm

Last login: Mon Jun 12 20:11:25 on console
ventura@imac-2 ~ % kmutil showloaded | grep itlwm
No variant specified, falling back to release
76 0 0xffffff8004372000 0xf3a000 0xf3a000 com.zxystd.itlwm (2.2.0) 9A95C75D-BFD8-334A-BBEC-91DD6C59ACD5 <51 17 7 6 3 1>
ventura@imac-2 ~ %

The right disk : yes !
And reset NVRAM : Yes !!

 

[CaseySJ]

Last login: Mon Jun 12 20:11:25 on console
ventura@imac-2 ~ % kmutil showloaded | grep itlwm
No variant specified, falling back to release
76 0 0xffffff8004372000 0xf3a000 0xf3a000 com.zxystd.itlwm (2.2.0) 9A95C75D-BFD8-334A-BBEC-91DD6C59ACD5 <51 17 7 6 3 1>
ventura@imac-2 ~ %

The right disk : yes !

What is the current setting of SecureBootModel in config.plist -> Misc -> Security? We should use “default”.

 

[zgonda]

What is the current setting of SecureBootModel in config.plist -> Misc -> Security? We should use “default”.

Yes :default !! SMBIOS : macpro7,1

 

[CaseySJ]

Yes :default !!

We should disable these kexts:

• BrightnessKeys.kext
• SmallTreeIntel8259x.kext

Also, are you using latest pre-release builds of:

• Lilu
• WhateverGreen
• AppleALC

We should not use boot arguments like “-lilubeta” or “-lilubetaall”

 

[zgonda]

We should disable these kexts:

• BrightnessKeys.kext
• SmallTreeIntel8259x.kext

Also, are you using latest pre-release builds of:

• Lilu
• WhateverGreen
• AppleALC

We should not use boot arguments like “-lilubeta” or “-lilubetaall”

OK to disable Brightnesskeys, but SmallTreeIntel8259x.kext is used by one of the ethernet port, no...?
The kexts are : lilu 1.6.6, WEG 1.6.5, AppleAlc 1.8.3 (all 23/06/12) and I don't use lilubeta neither --all as shown on a precedent picture.
EDIT : I've disabled Brightnesskeys and SmallTreeIntel8259x.kext and always :