<< Solved >> Gigabyte Z390 M SATA HDD detection problem in BIOS.

[vcapone]

I have Samsung 970 Evo Plus 250 GB + a Samsung SATA HDD 1TB.
My Samsung SATA 1TB HDD not recognized in mac and the uefi too.
Whats wrong???

After bios update (to 6c), nothing happened.
Plug the nvme ssd to the secondary m.2, nothing happened.
Plug the HDD to another SATA port, nothing happened.
Try to another cable, nothing happened

Without the Samsung 970 Evo plus nvme pie ssd the BIOS detect my SATA HDD.

 

[P1LGRIM]

<< Solved >> - Do the Samsung 970 EVO Plus drives work ? New Firmware Available 2B2QEXM7

Hi all, Some weeks ago Samsung introduced some new M2 NVM SSDs. I wanted to purchase the older 970 Evo model to create a dual boot system for my Intel Skull Canyon . The new drive is only slightly more expensive and I don't mind the additional 1000 MB/s write speeds. Are there any users that...

www.tonymacx86.com

 

[vcapone]

I think I have the latest firmware for it.

 

[vcapone]

Yes, I read the manual.

Pcie SSD in M2Q and the sata hdd is in the sata port 0. But i tried it in another, but nothing happened. The sata hdd not detected in BIOS.

 

[P1LGRIM]

Perhaps you have defective hardware somewhere in the chain.
No more guesses here.

 

[vcapone]

No, the HDD is good, I wrote it in the first post: the HDD is detected and works without the 970 evo plus in this motherboard. And it is working to another machine good.
Only it is problem if both are installed.

 

[vcapone]

After NVRAM reset, the SATA HDD is detected in BIOS and everything is fine.