- Joined
- Nov 3, 2017
- Messages
- 332
- Motherboard
- Gigabyte Z490 Designare
- CPU
- i9-10850K
- Graphics
- Radeon VII
- Mac
- Classic Mac
- Mobile Phone
I have my 3rd build up and running and it has the Z390 chipset, and it has the THB_C (Thunderbolt Add-in Card Connector) for the Gigabyte GC-Titan Ridge card. I have installed it on a my running system which has been updated to 10.14.3. Although I have 4 PCI devices, they do not show up in About This MAC, System Report, PCI, which is very annoying.
I loaded up MS Windows 10 and the card works fine in MS. Yet it is invisible in 10.14.3, I have a TAB in the Bios that is this card, but no combination so far has made it available. The card has 2 each PCI power connections, one THB_C 5 pin connector, and a USB 9 pin connector, all are connected on this system. Currently BIOS is set to power once.
Attached are my configs. I think Thunderbolt is a needed connection, which is why I am asking for help.
I loaded up MS Windows 10 and the card works fine in MS. Yet it is invisible in 10.14.3, I have a TAB in the Bios that is this card, but no combination so far has made it available. The card has 2 each PCI power connections, one THB_C 5 pin connector, and a USB 9 pin connector, all are connected on this system. Currently BIOS is set to power once.
Attached are my configs. I think Thunderbolt is a needed connection, which is why I am asking for help.