- Joined
- Jan 17, 2013
- Messages
- 22
- Motherboard
- Gigabyte Z77-UD5H v1.1
- CPU
- i3770 (nonK)
- Graphics
- AMD 7770
- Mac
- Mobile Phone
Hi,
I have 10.8 running perfectly on my system. At one time there were some issues with nVidia but overall sleep works (sleep app fix) and sound crackles 1st time use (but not a big deal). All USB3 works.
Now I am trying to upgrade to 10.9 Maverick and can't boot from the unibeast USB. I tested the USB on my mac and it works.
I installed the system by removing my nVidia 550ti video card (and used internal intel graphics) - and then same issue that it goes all the way upto like its going to load GUI and blank screen. Nothing shows up on screen and monitor just blinks that there is no signal.
Only way it worked:
- Install Maverick without nVidia video card.
- Make internal Intel primary display in bios
- Plug one DVI into Intel and second on nVidia (to get twin screen)
- Used npci=0x3000 IGPEnabler=no GrpahicsEnabler=Yes
I have internal graphics disabled. I need only nVidia work.
What I tried:
- Deleting all intelHD* kext (reboot automatically before loading gui)
- Disable / Enable Internal graphics (with and without wires connected)
- All sort of switches on/off Darwait / npci / IGEnabler / GraphicsEnabler
- One time I was able to boot into -x mode but couldn't duplicate
- vt-d and other options didn't help
- Newest / 2.0.1 chameleon didn't help
What I need:
- Disable intel graphics card
- What do I need to do to make it install with 550ti?
Only thing I can think of at this stage is that to copy all intel + nvidia + geForce kext from existing 10.8 to 10.9 (when I re-install it).
PS: I need dirty install, clean install not an option ATM
System:
3700 (non K)
Gigagbyte UD5H
nVidia 550ti video card
16gb ram
2 hard drives
I have 10.8 running perfectly on my system. At one time there were some issues with nVidia but overall sleep works (sleep app fix) and sound crackles 1st time use (but not a big deal). All USB3 works.
Now I am trying to upgrade to 10.9 Maverick and can't boot from the unibeast USB. I tested the USB on my mac and it works.
I installed the system by removing my nVidia 550ti video card (and used internal intel graphics) - and then same issue that it goes all the way upto like its going to load GUI and blank screen. Nothing shows up on screen and monitor just blinks that there is no signal.
Only way it worked:
- Install Maverick without nVidia video card.
- Make internal Intel primary display in bios
- Plug one DVI into Intel and second on nVidia (to get twin screen)
- Used npci=0x3000 IGPEnabler=no GrpahicsEnabler=Yes
I have internal graphics disabled. I need only nVidia work.
What I tried:
- Deleting all intelHD* kext (reboot automatically before loading gui)
- Disable / Enable Internal graphics (with and without wires connected)
- All sort of switches on/off Darwait / npci / IGEnabler / GraphicsEnabler
- One time I was able to boot into -x mode but couldn't duplicate
- vt-d and other options didn't help
- Newest / 2.0.1 chameleon didn't help
What I need:
- Disable intel graphics card
- What do I need to do to make it install with 550ti?
Only thing I can think of at this stage is that to copy all intel + nvidia + geForce kext from existing 10.8 to 10.9 (when I re-install it).
PS: I need dirty install, clean install not an option ATM
System:
3700 (non K)
Gigagbyte UD5H
nVidia 550ti video card
16gb ram
2 hard drives