Gigabyte H97, USB ports not right?

[Cosmix]

The motherboard has wifi and bluetooth, but I think t is not functioning. i didn't bother to do anything with it..

If using Ventura or Monterey, you may have an OOB WiFi/BT.
In the picture you can see "Transport USB"

 

[Lansmac]

Ok, this is HS11 then.. Sill wonder what it is

 

[Lansmac]

If using Ventura or Monterey, you may have an OOB WiFi/BT.
In the picture you can see "Transport USB"

meaning to say I can switch it on and will have bluetooth?

 

[Cosmix]

meaning to say I can switch it on and will have bluetooth?

Give it a try !

 

[Lansmac]

cannot switch it on
anyway, I will keep HS11 functional, since i don't know what it is. With the other HS0x and SS0x ports i can use all my usb ports properly. I have started fresh now and will make a new usbports.kext....

 

[Feartech]

Ok, so with the current setup, I have tested the usb2 ports with IOregistryexplorer.
HS01 and HS02 are at the front of my case (usb3.0 fysical ports)
HS07 and HS08 are the actual usb2.0 ports
HS03, HS04, HS09 and HS10 are the other active ports.
See also attached picture.
So, that seems to fit. In the next post I will show you some results with SSDT-EHCx-DISABLE.aml

HS07 and HS08 should be set to USB2

 

[Lansmac]

HS07 and HS08 should be set to USB2

Yes, forgot that. So, in attached file I posted my latest screenshot of usbports in hackintool.
The only unknown port is HS11. It might be bluetooth or something internal? how can i findout?
should I remove it from the usbports.kext? Total number is now 15 (including unknown HS11).

 

[Feartech]

Yes, saw that later. So, in attached file I posted my latest screenshot of usbports in hackintool.
The only unknown port is HS11. It might be bluetooth or something internal? how can i findout?
should I remove it from the usbports.kext? Total number is now 15 (including unknown HS11).

HS09 and HS10 are both set to USB3 but no SS09 and SS10 included?

and you have SS05 and SS06 set to USB3 but no HS ports for those?

maybe choose to have either HS/SS 09 and 10
or HS/SS 05 and 06

or whatever ports are handy to have

HS11 is your Bluetooth, that needs to be set to Internal

 

[Lansmac]

HS09 and HS10 are both set to USB3 but no SS09 and SS10 included?

and you have SS05 and SS06 set to USB3 but no HS ports for those?

maybe choose to have either HS/SS 09 and 10
or HS/SS 05 and 06

or whatever ports are handy to have

HS11 is your Bluetooth, that needs to be set to Internal

with the usbconfiguration with usbinjectall, it showed that:
-HS09 is a combi with SS05
-HS10 is a combi with SS06
I described it also in the comments in hackintool
no ss09 or ss10 exists
the existing combi seems to be working properly

I will set HS11 to internal!

 

[Lansmac]

So, i think this is my final usbportsconfiguration. Seems to be working fine! Thanks for all support and hope you agree with this setup

I will post a new thread about the BT usb port...