Gigabyte H110M-S2H won't detect unibeast bootable usb as UEFI. Can't boot installer

[spartan195x]

I made lots of USB with unibeast, and any of em worked. My motherboard reads the usb but not on uefi mode, When I try to boot the usb boots into a weird BIOS like menu in legacy mode or don't boot on anything and gives me an error abou there's any operating system to boot. I can't boot into the osx installer with usb in any mode

Here is one photo of the bios like menu:

What should I do to make my motherboard read the USB as UEFI? I'm doing something wrong?

 

[spartan195x]

Any idea?

 

[BreBo]

Any idea?

This usually happens when using USB 3 port. Use a USB 2 port or hub and a USB 2 drive for best results.
If you don't have any USB 2 ports, you can try to boot through Boot Maintenance Manager.

 

[spartan195x]

This usually happens when using USB 3 port. Use a USB 2 port or hub and a USB 2 drive for best results.
If you don't have any USB 2 ports, you can try to boot through Boot Maintenance Manager.

I know that usb 3.0 is not good, all usb are 2.0 and connected into 2.0

 

[bivujob]

Were you able to fix the problem? I have the same exact motherboard and am having the same exact problem