Contribute
Register

Gigabyte GA-Z77-DS3H - post Installation El Captain

Status
Not open for further replies.
Hello,

Today I managed to install El Capitain , with audio .

Using clover , the MULTIBEAST still nn was released .


Thank you all!!!

:):D:headbang:
 
having trouble with using audio_cloverALC-110_v1.0g.command with "y" retrun several times.

I run the command below, but still only show my usb audio device after reboot.




File: audio_cloverALC-110.command_v1.0o10
Password:
EFI partition is mounted
System Integrity Protection status: enabled (Custom Configuration).


Configuration:
Apple Internal: disabled
Kext Signing: disabled
Filesystem Protections: disabled
Debugging Restrictions: enabled
DTrace Restrictions: enabled
NVRAM Protections: enabled


This is an unsupported configuration, likely to break in the future and leave your machine in an unknown state.


OK to patch
Confirm Realtek ALC887 (y/n): y
ALC887 v_0x100302 (Current)
Clover Audio ID Injection (y/n): y
Use Audio ID: 1 (y/n): y


Download ALC887 files ...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 24502 100 24502 0 0 36147 0 --:--:-- --:--:-- --:--:-- 93163
Found non-key inside <dict> at line 105
Edit config.plist/Devices/Audio/Inject/1
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Edit config.plist/SystemParameters/InjectKexts/YES
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Download kext patches
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 1404 100 1404 0 0 7084 0 --:--:-- --:--:-- --:--:-- 7126
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Install /Volumes/EFI/EFI/CLOVER/kexts/10.11/realtekALC.kext
Download config kext and install ...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 3665 100 3665 0 0 17688 0 --:--:-- --:--:-- --:--:-- 17791
Install System/Library/Extensions/AppleHDA.kext/ALC887 zml files
Fix permissions ...
Kernel cache...
rebuilding //System/Library/PrelinkedKernels/prelinkedkernel
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext GenericUSBXHCI.kext
kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleHDA.kext
kextcache updated critical boot files, requesting launchd reboot


Install finished, restart required.
To save a Copy of this Terminal session: Terminal/Shell/Export Text As ...
logout
Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.
 
Drumitar said:
having trouble with using audio_cloverALC-110_v1.0g.command with "y" retrun several times.

I run the command below, but still only show my usb audio device after reboot.




File: audio_cloverALC-110.command_v1.0o10
Password:
EFI partition is mounted
System Integrity Protection status: enabled (Custom Configuration).


Configuration:
Apple Internal: disabled
Kext Signing: disabled
Filesystem Protections: disabled
Debugging Restrictions: enabled
DTrace Restrictions: enabled
NVRAM Protections: enabled


This is an unsupported configuration, likely to break in the future and leave your machine in an unknown state.


OK to patch
Confirm Realtek ALC887 (y/n): y
ALC887 v_0x100302 (Current)
Clover Audio ID Injection (y/n): y
Use Audio ID: 1 (y/n): y


Download ALC887 files ...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 24502 100 24502 0 0 36147 0 --:--:-- --:--:-- --:--:-- 93163
Found non-key inside <dict> at line 105
Edit config.plist/Devices/Audio/Inject/1
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Edit config.plist/SystemParameters/InjectKexts/YES
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Download kext patches
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 1404 100 1404 0 0 7084 0 --:--:-- --:--:-- --:--:-- 7126
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Found non-key inside <dict> at line 105
Error Reading File: /tmp/config.plist
Install /Volumes/EFI/EFI/CLOVER/kexts/10.11/realtekALC.kext
Download config kext and install ...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 3665 100 3665 0 0 17688 0 --:--:-- --:--:-- --:--:-- 17791
Install System/Library/Extensions/AppleHDA.kext/ALC887 zml files
Fix permissions ...
Kernel cache...
rebuilding //System/Library/PrelinkedKernels/prelinkedkernel
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext GenericUSBXHCI.kext
kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleHDA.kext
kextcache updated critical boot files, requesting launchd reboot


Install finished, restart required.
To save a Copy of this Terminal session: Terminal/Shell/Export Text As ...
logout
Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.
Click to expand...

Attach Config.plist.
 
thanks i have attached my config. i have updated from yosemite by just adding <key>BooterConfig</key> <string>0x28</string>
<key>CsrActiveConfig</key>
<string>0x3</string>

to my config.

I have always used usb audio before but would like to plug my earphone in the actual computer from time to time.

thanks
 

Attachments

  • config.plist
    4.4 KB · Views: 224
Drumitar said:
thanks i have attached my config. i have updated from yosemite by just adding <key>BooterConfig</key> <string>0x28</string>
<key>CsrActiveConfig</key>
<string>0x3</string>

to my config.

I have always used usb audio before but would like to plug my earphone in the actual computer from time to time.

thanks
Click to expand...

Config.plist is broken. It'll make your life easier if you edit your Config.plist with Clover Configurator. Need to add 1 to Audio in Devices section in Clover Configurator. (i.e Audio ID Layout is 1).
 
okay i see what you mean i load up my config.plist in clover config and all the fields are blank... so what now ?

start from scratch ?
 
Drumitar said:
okay i see what you mean i load up my config.plist in clover config and all the fields are blank... so what now ?

start from scratch ?
Click to expand...

Give this Config ago. Let me know if your sound works.
 

Attachments

  • config.plist
    4.8 KB · Views: 226
awesome that worked !, one more question as well are you using the nullcpumanagement kext ?
 
Drumitar said:
awesome that worked !, one more question as well are you using the nullcpumanagement kext ?
Click to expand...

No. Don't need to use NullCPUPowermanagement with Clover. The Z77-DS3H doesn't need NullCPUPowermanagement. The board has native CPU Powermanagement.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top