Getting video ports/higher resolution working on GA-Z87N-WIFI

[okolepuka]

I was hoping someone could give me specific steps for this MOBO.

Right now only DVI port works (others crash on startup)

I have the AZUL a-e framebuffer edit scripts ready to run.

 

[Bradjmeyer]

I have the same board and can't get HD resolutions at all. I have a GTX650 installed using the DVI port. I tried removing the graphics card and using onboard graphics, but nothing has worked. I followed set up instructions listed here.

http://www.tonymacx86.com/golden-bu...87n-wifi-core-i3-4340-intel-hd-4600-a-18.html

Then I spent 4 days researching forums with no luck on getting my resolution.

 

[okolepuka]

I read somewhere that Haswell wont support higher resolution yet.

In my quest for answers to my OP, Ive come across several fixes, but Im not sure which are outdated because a newer solution was figured out. Most of them are about getting HDMI sound working, which is not what I'm interested in

http://www.tonymacx86.com/graphics/125239-hd4600-hd4000-hd3000-framebuffer-edits.html

http://www.tonymacx86.com/378-new-intel-hd-graphics-boot-flags-chimera/comments4.html#comments

http://www.tonymacx86.com/graphics/...lags-igpenabler-igplatformid-igpdeviceid.html

toledo--HELP!

 

[wildwillow]

Just a thought, have you enabled the 1080p Display setting in MultiBeast or your native screen resolution? Under Customize>Boot Options?

 

[Bradjmeyer]

Got mine up and running in full HD. Problem was actually my tv. I tried a different TV with HDMI and I got full HD no Problems. I'm sure it was the tv and not the DVI because I tried from both Graphics card and onboard graphics. I reinstalled everything. Reformatted hard drive. Both TVs were plugged in and I got HD resolution, but my old tv did not display it properly even though it does support it.

 

[okolepuka]

Just a thought, have you enabled the 1080p Display setting in MultiBeast or your native screen resolution? Under Customize>Boot Options?

yeah I tried those

so wildwillow, do your ports all work? My board has 3 video ports, 2 HDMI and one DVI. The HDMIs max out at 1920 x 1200, the DVI maxes out at 1600 x 900

it seems to me if everything would work properly I could use any and all ports, and set higher resolutions through the displays CP.

So I did a fresh UNIBEAST Mavericks install, what do I do now replace the AppleFramebufferAzul kext?

 

[wildwillow]

yeah I tried those

so wildwillow, do your ports all work? My board has 3 video ports, 2 HDMI and one DVI. The HDMIs max out at 1920 x 1200, the DVI maxes out at 1600 x 900

it seems to me if everything would work properly I could use any and all ports, and set higher resolutions through the displays CP.

So I did a fresh UNIBEAST Mavericks install, what do I do now replace the AppleFramebufferAzul kext?

Both my HDMI ports and DP work. I only have 1920x1080p displays which both work, I have one monitor connected to the GT 640 and the other via DP(HD4600). How many monitors are you using or want to use connected to which ports. Sorry for the late reply, I read your post but was unable to reply and added it to my to do list.